AVSPARE.COM
parts catalog

PLATE 3156635 - Caterpillar



3156635 PLATE Caterpillar parts CB-14 PLATE
Rating:
65
Alternative (cross code) number:
CA3156635
315-6635
3156635
Caterpillar 3156635 PLATE
Weight: 0.16 pounds 0 kg.

Buy PLATE 3156635 Caterpillar genuine, new aftermarket tractor parts with delivery
VIBRATORY COMPACTOR,

Compatible equipment models: 3156635:

VIBRATORY COMPACTOR  CB-14   Caterpillar
Number on catalog scheme: 9
 
  For full view, you need register

Information:


Illustration 4 g03261789
(D) Track Block
Table 3
Tool Item Qty Part Number Description
A 198-4240 Digital Pressure Indicator Gp
A1 1 198-4234 Indicator
A2 1 198-4239 Pressure Sensor 41,368 kPa (6,000 psi)
A3 1 198-4236 Extension Cable
D 1 418-3610 Track block Machine Preparation
Position the machine on level ground and stop the engine.
Release the pressure in the hydraulic system. Refer to Testing and Adjusting, "System Pressure - Release".
Illustration 5 g03206857
Pressure tap for the drive pump
Attach a 41,368 kPa (6,000 psi) pressure sensor to the pressure tap for the drive pump. Test Procedure
Note: To adjust the main relief valve, always adjust the travel main relief valve before adjustments are made to the implement main relief valve. An adjustment to the travel operation of the main relief valve will change the pressure setting of the implement operation of the main relief valve.Travel Operation
Illustration 6 g03321066
(D) Track block
(1) Sprocket
Place track block (D) in sprocket (1) in order to block forward travel.
Start the engine.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F).
Place the machine controls at the following settings: engine speed dial "10" and AEC switch OFF.
Slowly move the right travel control lever to full FORWARD position and check the pressure gauge reading at the pressure tap for the drive pump. The pressure setting should be 35000 500 kPa (5076 73 psi).
Return the right travel control lever to the NEUTRAL position.
If the main relief valve pressure setting is not within the specification, adjust the main relief valve pressure setting. Implement Operation
Start the engine.
Place the machine controls at the following settings: engine speed dial "10" and AEC switch OFF.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F).
Slowly move the joystick for the bucket to the BUCKET CLOSE position (full extension of the bucket cylinder rod). Check the pressure gauge reading at the pressure tap for the drive pump. The pressure setting should be 30500 500 kPa (4424 73 psi).
Return the joystick for the bucket to the NEUTRAL position.
If the main relief valve pressure setting is not within the specification, adjust the main relief valve pressure setting. Adjustment Procedure
Note: To adjust the main relief valve, always adjust the travel main relief valve before adjustments are made to the implement main relief valve. An adjustment to the travel operation of the main relief valve will change the pressure setting of the implement operation of the main relief valve.Travel Operation
Illustration 7 g02552019
Cutaway of the main relief valve
(1) Main relief valve
(2) Adjustment screw (implement)
(3) Locknut (implement)
(4) Adjustment screw (travel)
(5) Locknut (travel)
To adjust the travel main relief valve, loosen the locknut (5) and turn the adjustment screw (4) until the pressure reading at the pressure tap for the drive pump is 35000 500 kPa (5076 73 psi). Note: Turn the adjustment screw clockwise in order to increase the pressure. Turn the adjustment screw counterclockwise in order to decrease the pressure.Note: Always make final pressure adjustments on pressure rise.
Tighten the locknut (5) to a torque of 29.4 2 N m (21.7

Caterpillar parts catalog:

Caterpillar parts catalog
CB14 Vibratory Utility Compactor DTT00001-UP (MACHINE) POWERED BY C1.1 Engine


Parts plate Caterpillar catalog:

1597342 PLATE-INFORMATION
120H, 12H, 140H, 143H, 160H, 163H, 216, 216B, 226B, 232B, 236, 236B, 242B, 247B, 248, 252B, 257B, 267B, 268B, 424D, 428C, 428D, 428E, 428F, 432D, 432E, 432F, 434E, 434F, 438C, 438D, 442D, 442E, 444E, ...
7V5628 PLATE
10 FT, 10-20B, 30/30, 330D L, 3516C, 533, 539, 543, 554, 8 FT, 8-16B, 824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 844, 910E, 910G, 910K, 914G, 914K, 916, 918...
2396986 PLATE-SERIAL NUMBER
1090, 1190, 1190T, 120H, 1290T, 135H, 1390, 216B, 216B3, 226B, 226B3, 2290, 232B, 236B, 236B3, 236D, 2390, 2391, 242B, 242B3, 242D, 246C, 246D, 2470C, 247B, 247B3, 2491, 252B, 252B3, 256C, 2570C, 257B...
3E8320 PLATE-INSTRUCTION
120H, 120H ES, 120H NA, 12H, 12H ES, 135H, 135H NA, 140H, 140H ES, 143H, 14H, 14H NA, 160H, 160H ES, 163H, 163H NA, 16H, 16H NA, 2384C, 2470C, 2484C, 2570C, 2670C, 2864C, 305.5, 305.5E, 306, 307, 307B...
1537990 PLATE
3003, 301.5, 3011C, 3013, 3013C, 3014, 302.5, 303.5, C0.5, C0.7, C1.1, C1.5, C1.6, C2.2, CB-14, CB-214D, CB-214E, CB-22, CB-334D, CB-334E, CB-335D, CB-34, CB22B, CB24B, CB32B, CC24B
1671473 PLATE
CB-14, CB-214D, CB-214E, CB-22, CB-334E, CB-34
2500082 PLATE
CB-14, CB-214E, CB-334E, CB-34
2759772 PLATE
CB-14, CB-22, CB-334E, CB-34
2630837 PLATE AS
AS3251C, AS3301C
2630830 PLATE AS
AS3251C, AS3301C
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.