AVSPARE.COM
parts catalog

PLATE 3157141 - Caterpillar



3157141 PLATE Caterpillar parts PLATE
Rating:
71
Alternative (cross code) number:
CA3157141
315-7141
3157141
Caterpillar 3157141 PLATE

Buy PLATE 3157141 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g02503796
Table 1
Specification for 332-1822 Bogie Gp    
Item     Qty     Part     Specification Description    
1     1     233-9842 Hub Cap     Apply black Loctite 593 all around the hub cap to fill gap from chamfer on mating wheel assembly.    
2     2     312-7705 Bearing Adjuster     Torque to
240 25 N m (177 18 lb ft).
Bearing adjusters to be flush within
0.0 to 0.5 mm (0.00 to 0.02 inch) to spindle assembly and or motor mount after tightening.    
3     10     1K-7019 Shim     Thickness is
0.51 mm (0.020 inch).
Use as required in order to adjust the clearance.    
4     1     006-8943 Nut     Use the following procedure in order to Torque the nut:
1. Torque the nut to
280 10 N m (207 7 lb ft) while turning the hub.
2. Loosen the nut by one turn, while turning the hub.
3. Again, Torque the nut to
75 5 N m (55 4 lb ft)
4. Continue to Torque the nut until the cotter pin can be inserted through the shaft and the nut.    
5     2     4D-3882 Bearing Cone     Pack the bearing cones with the medium pressure lithium grease.
Lubricate the bearing cones with the 5P-0960 Grease Cartridge.    
6     2     006-7231 Bearing Cup     Pack the bearing cups with medium pressure lithium grease.
Lubricate the bearing cups with the 5P-0960 Grease Cartridge.    
7     4     6R-1554 Bearing As     Apply green Loctite 609.    
8     1     061-6915 Nut     Torque to
609 75 N m (449 55 lb ft).    
9     10     132-8584 Nut     Torque to
140 25 N m (103 18 lb ft)    
10     2     1B-4443 Nut     Torque to
644 25 N m (475 18 lb ft).
Again Torque the nuts until the cotter pin can be inserted through the bolts and the nuts.    
11     1     1A-4168 Nut     Torque to
609 75 N m (449 55 lb ft).    


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.