AVSPARE.COM
parts catalog

PLATE-CLUTCH 3534888 - Caterpillar



3534888 PLATE-CLUTCH Caterpillar parts PLATE
Rating:
77
Alternative (cross code) number:
CA3534888
353-4888
3534888
Caterpillar 3534888 PLATE-CLUTCH
Weight: 1 pounds 0 kg.

Buy PLATE-CLUTCH 3534888 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 23
 
  For full view, you need register

Information:


Illustration 1 g01120149
Left side - large compartment near radiator (1) Conveyor mode switch (2) Conveyor mode switch (3) Conveyor ECM display (4) Conveyor ECM (5) Harness connectorPerform the following procedure in order to troubleshoot the diagnostic code information. Locate the ECM (4), the conveyor mode switch (1) and the conveyor display mode switch (2) behind the large hinged panel on the left side of the machine.
Illustration 2 g01111944
Display area showing mode "-1-"
Place the ECM in the service mode "- 1 -". In order to enter the service mode, press and hold the ECM mode switch in the SCROLL position. Release the switch while the mode number "- 1 -" is shown on the display.
A diagnostic code is shown at this time. The display toggles between showing the CID and the FMI. When there are no diagnostic codes the display will show "- - -" only.
Illustration 3 g01111945
(A) Display area showing CID and diagnostic code present indicator ON. (B) Display area showing FMI and diagnostic code present indicator ON.
In order to scroll through the diagnostic codes, press and hold the display mode switch in the INCREMENT position. The display momentarily shows the CID for each diagnostic code. The word "END" is shown after the last diagnostic code on the list has been displayed.
In order to place the selected diagnostic code on hold and stop scrolling, release the display mode switch while the diagnostic code is being displayed.
Observe the red indicator on the right side of the display. In diagnostic mode, the red indicator functions as a diagnostic code present indicator. If the red indicator is ON, then the diagnostic code that is on hold is currently active. If the diagnostic code present indicator is Off, then the diagnostic code that is on hold is not active at this time. The diagnostic code has occurred in the past and the machine condition that caused the code is no longer present.
In order to troubleshoot the problem that caused the diagnostic code to become active, refer to the procedure with the same CID and FMI that is listed in the "Diagnostic Code Procedures" section of this manual.
After a diagnostic code has been corrected, clear the diagnostic code. Before clearing the diagnostic code, ensure that all harness connectors have been reconnected and that all wire insulation punctures have been repaired. In order to clear a diagnostic code, hold the display mode switch in the CLEAR/STORE position until "-" appears. After clearing, the display advances to the next available diagnostic code.Note: The ECM will not allow an active diagnostic code to be cleared. The code must no longer be active (red indicator OFF).
Repeat Step 2 through Step 7 for any remaining diagnostic codes. In order to return to the normal mode, press and hold the control mode switch. Release the switch when "- 0 -" is displayed.

Caterpillar parts catalog:

Caterpillar parts catalog
CX38-P800 Powertrain Package-Well Service Transmission A3X00001-UP
CX38-P892-C18I Petroleum Power Train Package A3X00001-UP POWERED BY C18 Industrial Engine
745 Articulated Truck 3T600001-UP (MACHINE) POWERED BY C18 Engine
740EJ Articulated Truck 3T700001-UP (MACHINE) POWERED BY C18 Engine
745 Articulated Truck 3F600001-UP (MACHINE) POWERED BY C18 Engine
740 EJ Articulated Truck 3F700001-UP (MACHINE) POWERED BY C18 Engine
740 Articulated Truck 3T800001-UP (MACHINE) POWERED BY C15 Engine
740 Articulated Truck 3F800001-UP (MACHINE) POWERED BY C15 Engine
735C Articulated Truck TFJ00001-UP (MACHINE) POWERED BY C15 Engine
735C Articulated Truck LFJ00001-UP (MACHINE) POWERED BY C15 Engine
745C Articulated Truck TFK00001-UP (MACHINE) POWERED BY C18 Engine
745C Articulated Truck LFK00001-UP (MACHINE) POWERED BY C18 Engine
740C Ejector Articulated Truck TFN00001-UP (MACHINE) POWERED BY C18 Engine
740C Ejector Articulated Truck LFN00001-UP (MACHINE) POWERED BY C18 Engine


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.