AVSPARE.COM
parts catalog

PLATE AS-LH 3599675 - Caterpillar



3599675 PLATE AS-LH Caterpillar parts PLATE
Rating:
21
Alternative (cross code) number:
CA3599675
359-9675
3599675
Caterpillar 3599675 PLATE AS-LH

Buy PLATE AS-LH 3599675 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

1. Remove bolt (1) to disconnect bracket (2) from the bonnet. 2. Remove the bolts, bonnet (4), the gasket between the bonnet, and core assembly (5) from bonnet (6).3. Remove two bolts that hold the elbow to bonnet (6). Remove the four bolts and bonnet (6) from water pump (7). 4. Remove adapter (8) from bonnet (6). Remove O-ring seals (9) and (10). 5. Use a 3.20 mm (.125 in) diameter rod (11) to make sure the tubes in core assembly (5) are clean.Install Oil Cooler
1. Install two O-ring seals (3) on adapter (2). Put clean engine oil or glycerine on each seal. Install adapter (2) in bonnet (1). 2. Install gasket (6) and bonnet (1) on the water pump. Install the bolt that holds elbow (5) to bonnet (1). Install the bolt that holds clip (4) to elbow (5). 3. Install O-ring seal (8) on bonnet (7). Put clean engine oil or glycerine on the seal. Install bonnet (7) in core assembly (9). 4. Make sure gasket (10) is in position on the engine block. Install bonnet (7) and core assembly (9) as a unit. 5. Install bolt (11) that holds bracket (12) in position against the bonnet.End By:a. install oil filter base


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.