PLATE-WEAR 3967572 - Caterpillar

specified parameters that will enhance the fuel efficiency and the operator's convenience can be programmed into the Electronic Control Module (ECM). Some parameters may affect engine operation. This may lead to complaints from the operator about power or about performance. The following engine related parameters may be programmed by the customer with Caterpillar electronic service tools in order to customize the operation of the engine to the specific application:
Low Idle
Engine Rating
Vessel ID
Engine Monitoring Mode
Maintenance Indicator Mode
Customer Specified Password
Engine Location
Transmission Oil Set Points
Air/Fuel Ratio
Maximum Trolling Speed
Coolant Level Sensor – Enable/DisableCustomer Passwords
First Password ____________________
Second Password ____________________Identification Number (VIN) ____________________Power Rating (hp at rpm) ____________________Rating Selection (A-E) ____________________Location of Engine (Port or Starboard) Trolling Speed (Maximum rpm) ____________________Air/Fuel Ratio
Level 1: Minimal Smoke ____________________
Level 2: Optimum Performance ____________________
Level 3: Maximum Acceleration ____________________Warning Set Point
Transmission Oil Pressure ____________________
Transmission Oil Temperature ____________________Engine Parameters
Top Engine Limit (TEL) at 100% load (If Applicable) ____________________
High Idle (If Applicable) ____________________
Low Idle ____________________Engine Monitoring Package
Warning ____________________
Warning/Derate ____________________
Off ____________________
Coolant Level Sensor Enable/Disable ____________________The customer specified parameters can be changed as often as needed. Password protection is provided so that the customer can change the parameters. Ensure that a record of the parameters is kept in the Operation and Maintenance Manual. For detailed instructions on programming the engine for optimum performance and for optimum fuel economy, consult your Caterpillar dealer.