parts catalog

PLATE-WEAR 4415506 - Caterpillar

4415506 PLATE-WEAR Caterpillar parts
Alternative (cross code) number:
Caterpillar 4415506 PLATE-WEAR

Buy PLATE-WEAR 4415506 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Illustration 1 g01848737Put nut (1) and sleeve (2) over the tube. Push the tube into the counterbore of the fitting body as far as possible. There are two methods that may be used to tighten the nut. Tighten the nut with one of two methods.
Tighten nut (1) to the torque that is specified in Table 1.
Tighten nut (1) by the number of turns that is specified in Table 1. The number of turns is for the turns after the nut is finger tight.
Table 1
Nominal Outer Diameter of the Tube Torque Turn Tightening
Nonmetallic Tubing Copper Tubing
6.35 mm (0.250 inch) 11 3 N m (97 27 lb in) 3 2
9.53 mm (0.375 inch) 20 3 N m (175 27 lb in) 4 2
12.70 mm (0.500 inch) 35 6 N m (26 4 lb ft) 4 2
15.88 mm (0.625 inch) 40 6 N m (30 4 lb ft) 3 1/2 3
19.05 mm (0.750 inch) 50 6 N m (37 4 lb ft) 3 1/2 3 Note: Clean the connectors and the seals and lubricate the connectors and seals by using Refrigerant Mineral Oil. This is a special oil that is compatible with R−134a.

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.