4415545 PLATE-WEAR(LH) Caterpillar parts
Rating:
Alternative (cross code) number:
CA4415545
441-5545
4415545
CA4415545
441-5545
4415545
For full view, you need register
Information:
Schematic Code 200000
Illustration 1 g00919310
(1) Contacts for the internal alarm circuit close on alarm condition. The circuit must be opened externally in order to reset the alarm. The circuit is rated at 30 DCV and 0.150 Amp. (2) Input for the control of the setpoint for the analog voltage (3) Open this contact in order to enable control of the VAR/PF. The generator must be connected to another power source before the VAR/PF is enabled. (4) Open this contact in order to enable reactive droop. (5) These contacts can be used in order to adjust the voltage. (6) Lead "B" is used for single-phase power. (7) This transformer is used for matching voltage.Schematic Code 200100
Illustration 2 g00919400
(1) Contacts for the internal alarm circuit close on alarm condition. The circuit must be opened externally in order to reset the alarm. The circuit is rated at 30 DCV and 0.150 Amp. (2) Input for the control of the setpoint for the analog voltage (3) Open this contact in order to enable control of the VAR/PF. The generator must be connected to another power source before the VAR/PF is enabled. (4) Open this contact in order to enable reactive droop. (5) These contacts can be used in order to adjust the voltage. (6) Lead "B" is used for single-phase power. (7) This transformer is used for matching voltage. (8) At start-up, this contact should be closed at 90% of the rated speed.Schematic Code 230000
Illustration 3 g00919413
(1) Contacts for the internal alarm circuit close on alarm condition. The circuit must be opened externally in order to reset the alarm. The circuit is rated at 30 DCV and 0.150 Amp. (2) Input for the control of the setpoint for the analog voltage (3) Open this contact in order to enable control of the VAR/PF. The generator must be connected to another power source before the VAR/PF is enabled. (4) Open this contact in order to enable reactive droop. (5) These contacts can be used in order to adjust the voltage. (6) Lead "B" is used for single-phase power. (7) This transformer is used for matching voltage.Schematic Code 230100
Illustration 4 g00919424
(1) Contacts for the internal alarm circuit close on alarm condition. The circuit must be opened externally in order to reset the alarm. The circuit is rated at 30 DCV and 0.150 Amp. (2) Input for the control of the setpoint for the analog voltage (3) Open this contact in order to enable control of the VAR/PF. The generator must be connected to another power source before the VAR/PF is enabled. (4) Open this contact in order to enable reactive droop. (5) These contacts can be used in order to adjust the voltage. (6) Lead "B" is used for single-phase power. (7) This transformer is used for matching voltage. (8) At start-up, this contact should be closed at 90% of the rated speed.
Illustration 1 g00919310
(1) Contacts for the internal alarm circuit close on alarm condition. The circuit must be opened externally in order to reset the alarm. The circuit is rated at 30 DCV and 0.150 Amp. (2) Input for the control of the setpoint for the analog voltage (3) Open this contact in order to enable control of the VAR/PF. The generator must be connected to another power source before the VAR/PF is enabled. (4) Open this contact in order to enable reactive droop. (5) These contacts can be used in order to adjust the voltage. (6) Lead "B" is used for single-phase power. (7) This transformer is used for matching voltage.Schematic Code 200100
Illustration 2 g00919400
(1) Contacts for the internal alarm circuit close on alarm condition. The circuit must be opened externally in order to reset the alarm. The circuit is rated at 30 DCV and 0.150 Amp. (2) Input for the control of the setpoint for the analog voltage (3) Open this contact in order to enable control of the VAR/PF. The generator must be connected to another power source before the VAR/PF is enabled. (4) Open this contact in order to enable reactive droop. (5) These contacts can be used in order to adjust the voltage. (6) Lead "B" is used for single-phase power. (7) This transformer is used for matching voltage. (8) At start-up, this contact should be closed at 90% of the rated speed.Schematic Code 230000
Illustration 3 g00919413
(1) Contacts for the internal alarm circuit close on alarm condition. The circuit must be opened externally in order to reset the alarm. The circuit is rated at 30 DCV and 0.150 Amp. (2) Input for the control of the setpoint for the analog voltage (3) Open this contact in order to enable control of the VAR/PF. The generator must be connected to another power source before the VAR/PF is enabled. (4) Open this contact in order to enable reactive droop. (5) These contacts can be used in order to adjust the voltage. (6) Lead "B" is used for single-phase power. (7) This transformer is used for matching voltage.Schematic Code 230100
Illustration 4 g00919424
(1) Contacts for the internal alarm circuit close on alarm condition. The circuit must be opened externally in order to reset the alarm. The circuit is rated at 30 DCV and 0.150 Amp. (2) Input for the control of the setpoint for the analog voltage (3) Open this contact in order to enable control of the VAR/PF. The generator must be connected to another power source before the VAR/PF is enabled. (4) Open this contact in order to enable reactive droop. (5) These contacts can be used in order to adjust the voltage. (6) Lead "B" is used for single-phase power. (7) This transformer is used for matching voltage. (8) At start-up, this contact should be closed at 90% of the rated speed.