4416120 PLATE AS-RH Caterpillar parts
Rating:
Alternative (cross code) number:
CA4416120
441-6120
4416120
CA4416120
441-6120
4416120
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7262 Telescoping Magnet 1 Start By:
Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00540954
Use Tooling (A) to remove lifters (1). Note: Place an identification mark on the lifters for installation purposes.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-7262 Telescoping Magnet 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Lubricate the lifters with clean oil before installing the lifters in the cylinder block.
Illustration 2 g00540954
Use Tooling (A) to install lifters (1). Note: Ensure that the lifters are installed in the original location and that the lifters are seated correctly.End By:
Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7262 Telescoping Magnet 1 Start By:
Remove the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00540954
Use Tooling (A) to remove lifters (1). Note: Place an identification mark on the lifters for installation purposes.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-7262 Telescoping Magnet 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Lubricate the lifters with clean oil before installing the lifters in the cylinder block.
Illustration 2 g00540954
Use Tooling (A) to install lifters (1). Note: Ensure that the lifters are installed in the original location and that the lifters are seated correctly.End By:
Install the camshaft. Refer to Disassembly and Assembly, "Camshaft - Remove and Install".