4416645 PLATE AS Caterpillar parts
793F AC
Rating:
Alternative (cross code) number:
CA4416645
441-6645
4416645
CA4416645
441-6645
4416645
TRUCK,
Compatible equipment models: 4416645:
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the engine control module. Refer to Disassembly and Assembly, "Engine Control Module - Remove and Install".
Remove the fuel manifold. Refer to Disassembly and Assembly, "Fuel Control Manifold (ARD) - Remove".
Illustration 1 g01845073
Disconnect tube assemblies (1) and disconnect harness assembly (2) .
Illustration 2 g01361219
Remove bolt (3) .
Remove nut (5) and remove bracket (4) .
Illustration 3 g01361237
Remove bolts (6) and remove cylinder block cover (7) .Installation Procedure
Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 4 g01361237
Position cylinder block cover (7) and install bolts (6) .
Illustration 5 g01361219
Position bracket (4) and install nut (5) .
Install bolt (3) .
Illustration 6 g01845073
Connect tube assemblies (1) and connect harness assembly (2) .End By:
Install the fuel manifold. Refer to Disassembly and Assembly, "Fuel Control Manifold (ARD) - Install".
Install the engine control module. Refer to Disassembly and Assembly, "Engine Control Module - Remove and Install".
Start By:
Remove the engine control module. Refer to Disassembly and Assembly, "Engine Control Module - Remove and Install".
Remove the fuel manifold. Refer to Disassembly and Assembly, "Fuel Control Manifold (ARD) - Remove".
Illustration 1 g01845073
Disconnect tube assemblies (1) and disconnect harness assembly (2) .
Illustration 2 g01361219
Remove bolt (3) .
Remove nut (5) and remove bracket (4) .
Illustration 3 g01361237
Remove bolts (6) and remove cylinder block cover (7) .Installation Procedure
Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 4 g01361237
Position cylinder block cover (7) and install bolts (6) .
Illustration 5 g01361219
Position bracket (4) and install nut (5) .
Install bolt (3) .
Illustration 6 g01845073
Connect tube assemblies (1) and connect harness assembly (2) .End By:
Install the fuel manifold. Refer to Disassembly and Assembly, "Fuel Control Manifold (ARD) - Install".
Install the engine control module. Refer to Disassembly and Assembly, "Engine Control Module - Remove and Install".
Parts plate Caterpillar catalog:
1090, 1190, 1190T, 120M, 120M 2, 1290T, 12M 2, 12M 3, 12M 3 AWD, 1390, 140M, 140M 2, 140M 3, 140M 3 AWD, 14H, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16H NA, 16M, 2290, 235, 235D, 2390, 2391, 245, 2491...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12E, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
215, 215B, 225, 229, 235, 235B, 235D, 245, 245B, 24H, 24M, 5110B, 5130, 5130B, 5230, 5230B, 528, 589, 621, 621B, 621E, 621F, 621G, 621R, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631C, 631E, 631G, 633...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
1796912
PLATE
374D L, 550, 550B, 560B, 570, 570B, 580, 580B, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 797, 797B, 797F, 844, 844H, 990 II, 990H, 993K, 994F, 994H
374D L, 550, 550B, 560B, 570, 570B, 580, 580B, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 797, 797B, 797F, 844, 844H, 990 II, 990H, 993K, 994F, 994H
3191847
PLATE-INDICATOR
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F, 980H
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F, 980H
789B, 789C, 789D, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
8X5976
PLATE AS
793, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
793, 793B, 793C, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ
1560128
PLATE
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F
793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797, 797B, 797F