AVSPARE.COM
parts catalog

PLATE-WEAR 4646273 - Caterpillar



4646273 PLATE-WEAR Caterpillar parts PLATE
Rating:
61
Alternative (cross code) number:
CA4646273
464-6273
4646273
Caterpillar 4646273 PLATE-WEAR

Buy PLATE-WEAR 4646273 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 3
 
  For full view, you need register

Information:


Illustration 1 g00613849
To facilitate removal of the bucket pins without causing damage to the pins, the bearings, and/or the O-ring seals put the bucket on the floor and the stick in a vertical position, as shown.
Start the engine. Park the machine on a hard, level surface. Position the bucket, the stick, and the bucket control linkage, as shown. Shut off the engine.
Illustration 2 g00884725
Remove bolts (1) and plate (2).
Illustration 3 g00884729
Slide O-ring seals (3) off the pin joints between the bucket and link assembly (4) and onto the flanges of the bucket.
Illustration 4 g00884742
Make sure that the threaded puller hole in bucket pin (6) is clean prior to installation of Tooling (A). Use a lifting sling and a hoist to install Tooling (A) to bucket pin (6). The weight of Tooling (A) is approximately 175 kg (380 lb). Note: Use Tooling (A) for H-Family Bucket. Use Tooling (B) for J-Family Bucket.
When the pin assembly is removed, the linkage assembly may swing out of the bucket. To prevent possible personal injury, do not stand in front of the linkage assembly when the pin assembly is being removed.
Note: Do not remove bucket pin (6) completely from the bucket. Link assembly (5) will swing forward when the bucket pin is removed.
Use Tooling (A) to remove bucket pin (6) far enough to free link assembly (5) from the bucket.
Illustration 5 g00889448
Remove Tooling (A) from bucket pin (6). Use a lifting sling and a hoist to remove bucket pin (6). The weight of the bucket pin is approximately 95 kg (205 lb). Remove O-ring seals (3) from the flanges on the bucket.
Illustration 6 g00884879
Slide O-ring seals (7) off the pin joints between the stick and the bucket and onto the flanges on the bucket.
Illustration 7 g00884885
Remove bolts (8) and plate (9).
Illustration 8 g00884896
Make sure that the threaded puller hole in bucket pin (10) is clean prior to installation of Tooling (B). Use a lifting sling and a hoist to install Tooling (B) to bucket pin (10). The weight of Tooling (B) is approximately 175 kg (380 lb).
Remove Tooling (B) and bucket pin (10) together. The weight of Tooling (B) and bucket pin (10) is approximately 280 kg (615 lb).
Remove Tooling (B) from bucket pin (10). The weight of bucket pin (10) is approximately 102 kg (225 lb).
Start the engine, and raise the stick out of the bucket.
Illustration 9 g00884933
Remove the O-ring seals (not shown) from the bucket flanges.
Remove bolts (14), plate (13), shims (12), and flange (11).

Caterpillar parts catalog:

Caterpillar parts catalog
980M Wheel Loader MK200001-UP (MACHINE) POWERED BY C13 Engine
980M Wheel Loader MGD00001-UP (MACHINE) POWERED BY C13 Engine
980K Wheel Loader GTZ00001-UP (MACHINE) POWERED BY C13 Engine
980M Wheel Loader N8T00001-UP (MACHINE) POWERED BY C13 Engine


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.