PLATE AS-HINGE 4647296 - Caterpillar

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-3822 Bolt 2
6V-5839 Washer 2
1P-5546 Crossblock 1
5P-4168 Step Plate 1
5F-7366 Screw 1
B 1P-2420 Transmission Repair Stand 1 Start By:
Remove the swivel. Refer to Disassembly and Assembly, "Swivel - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Thoroughly clean the outside of the swivel prior to disassembly.
Illustration 1 g01434178
Illustration 2 g00633841
Use a suitable lifting device to position the swivel onto Tooling (B). Fasten the swivel to Tooling (B), as shown. The weight of the swivel is approximately 43 kg (95 lb).
Remove bolts (1) and cover (2) from outside housing (8).
Remove O-ring seal (7) from outside housing (8).
Remove bolts (4) and retainer (5) from rotor (9).
Use Tooling (A) in order to separate outside housing (8) from rotor (9). The weight of outside housing (8) is approximately 20 kg (45 lb). The weight of rotor (9) is approximately 21 kg (46 lb).
Remove seals (3) from outside housing (8).
Remove O-ring seals (6) from the outside housing (8).
Remove plug (11) and O-ring seal (10).