AVSPARE.COM
parts catalog

PLATE AS 4647438 - Caterpillar



4647438 PLATE AS Caterpillar parts PLATE
Rating:
21
Alternative (cross code) number:
CA4647438
464-7438
4647438
Caterpillar 4647438 PLATE AS

Buy PLATE AS 4647438 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 5
 
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     9U-7349     Valve Driver     1    
B     275-2423     Valve Guide Installer     1    Start By:
Remove the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00790324
Use Tooling (A) to remove valve guides.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01317232
Lubricate the outside of the valve guides with clean engine oil.Note: Depending on the cylinder head, the same valve guides for inlet and exhaust or different valve guides for inlet and exhaust may exist. Depending on the valve guide, the installation height may change.
Use Tooling (A) and Tooling (B) to install the valve guides. The inside diameter of the guides must be 9.487 0.025 mm (0.3735 0.0010 inch). The maximum diameter for used guides is 9.545 mm (0.3758 inch).For 213-7536 Valve Guide (Inlet) , install to a height of 26.0 0.8 mm (1.02 0.03 inch).For 213-7537 Valve Guide (Exhaust) , install to a height of 32.3 0.8 mm (1.27 0.03 inch).For 123-3984123-3985151-1329151-1330 Valve Guides , install to a height of 32.3 0.8 mm (1.27 0.03 inch).End By: Install the inlet and exhaust valves. Refer to Disassembly and Assembly, "Inlet and Exhaust Valves - Remove and Install".

Caterpillar parts catalog:

Caterpillar parts catalog
AP1055 F Asphalt Paver TJ500001-UP (MACHINE) POWERED BY C7.1 Engine
AP1000 F Asphalt Paver AC400001-UP (MACHINE) POWERED BY C7.1 Engine
AP1055 F Asphalt Paver RLM00001-UP (MACHINE) POWERED BY C7.1 Engine
AP655F & AP600F Asphalt Paver 65500001-UP (MACHINE) POWERED BY C4.4 Engine
AP600F, AP655F Asphalt Paver LR600001-UP (MACHINE) POWERED BY C7.1 Engine


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.