AVSPARE.COM
parts catalog

PLATE 4Z9344 - Caterpillar



4Z9344 PLATE Caterpillar parts D11R PLATE
Rating:
77
Alternative (cross code) number:
CA4Z9344
4Z-9344
4Z9344
Caterpillar 4Z9344 PLATE

Buy PLATE 4Z9344 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 4Z9344:

TRACK-TYPE TRACTOR  D11R   Caterpillar
Number on catalog scheme: 19
 
  For full view, you need register

Information:

Temperature Sensor (Transmission Oil)
Illustration 10 g01120194
Temperature SensorNote: A machine is equipped with a transmission oil temperature sensor and a torque converter temperature sensor. Both sensors are similar, but the location is different. Other machines use the transmission oil temperature sensor which is located below the pump on the suction side. The temperature sensor for the steering oil informs the ECM of the temperature of the steering system oil. The ECM uses the information about the temperature in order to adjust the commands for braking control. The adjustment compensates for the effect of cold oil on the brake valve. The ECM reduces the command for the brake pressure for full retraction when the steering oil temperature is below a certain temperature.The transmission oil temperature sensor informs the ECM of the temperature of the transmission oil. The ECM uses the information for the temperature to adjust shifting time of the transmission. The adjustment will provide smooth shifting over the full range of the transmission oil temperature. On some machines, the ECM also uses transmission oil temperature in order to perform adjustments on the commands for brake control. The temperature sensor is a resistive sender. The higher resistance reading will output a higher temperature reading.Pressure Sensor (Steering Charge)
Illustration 11 g01135291
The steering charge pressure sensor is located on the rear of the tractor under the fuel tank. The sensor is located on the inlet side of the filter housing. The pressure sensor informs the ECM of system pressure. The position sensor outputs a pulse width modulated signal. The duty cycle of the signal will vary in proportion to the system pressure. The PWM signal is an input to the ECM. The ECM uses the signal in order to monitor the pressure of the steering system. The ECM provides an 5 volt supply to the sensor.The charge pressure sensor connects to the ECM through contact J1-36.Position Sensor (Service Brake Pedal)
Illustration 12 g00904530
Position Sensor (Service Brake Pedal)The position sensors inform the ECM of the position of the pedals that are controlled by the operator. The position sensors output a pulse width modulated signal. The duty cycle of the signal will vary in proportion to the position of the pedal. These PWM signals are inputs to the ECM. The ECM uses the signals in order to determine the position of the pedal. The frequency of this signal is constant at approximately 500 Hz. The ECM provides an 8 volt supply to the sensor. The position sensor for the service brake pedal continuously informs the ECM of the position of the service brake pedal. The ECM uses the duty cycle of the signal in order to determine the position of the pedal. The ECM uses the position of the pedal in order to determine the desired speed of the machine and the desired state of the parking brake. The duty cycle of the sensor signal decreases as the pedal is depressed. Position Sensor (FNR Shifter)
Illustration 13 g01135559
The sensor informs the ECM of the position of the direction/speed control lever

Caterpillar parts catalog:

Caterpillar parts catalog
D11R Custom Parts Manual Track-Type Tractor 8ZR00001-UP (MACHINE) POWERED BY 3508 Engine


Parts plate Caterpillar catalog:

1687944 PLATE-RETRACTION
345C, 345C L, 345C MH, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 5110B, 824G II, 824H, 825G II, 825H, 826G II, 826H, 834H, 83...
1388173 PLATE-VALVE
5110B, 621K, 623K, 627K, 824G II, 824H, 824K, 825G II, 825H, 825K, 826G II, 826H, 826K, 834G, 834H, 836G, 836H, 924G, 924GZ, 924H, 924HZ, 966G, 966K, 966M, 966M XE, 972G, 972K, 972M, 972M XE, 980G, 98...
7C6209 PLATE-THRUST
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797...
2253100 PLATE-SPACER
24H, 3412, 3412C, 3412D, 3412E, 5110B, 651E, 657E, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 777C, 777D, 777F, 777G, 844, 844H, 844K, 854K, 99...
3P7447 PLATE-CLUTCH
24H, 589, 776C, 776D, 777B, 777D, 777F, 777G, 824C, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826C, 826G, 826G II, 826H, 826K, 834B, 834G, 834H, 834K, 836, 836G, 836H, 836K, 844, 844H, 980...
1960225 PLATE
725, 725C, 730, 730C, 769D, 770, 770G, 770G OEM, 771D, 772, 772G, 772G OEM, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 784C, 785C, 785D, 834K, 836K, 844, 9...
2531346 PLATE-WARNING
1290T, 1390, 2491, 2590, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311D LRR, 311F LRR, 312C, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, 313D2, 313D2 LGP, 314D CR...
4J3816 PLATE
215, 215B, 225, 229, 235, 235B, 235D, 245, 245B, 24H, 24M, 5110B, 5130, 5130B, 5230, 5230B, 528, 589, 621, 621B, 621E, 621F, 621G, 621R, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631C, 631E, 631G, 633...
4T9426 PLATE-ISOLATION
225, 227, 235, 235B, 235D, 245, 320B FM LL, 325B L, 325C, 330B L, 330C L, 5130, 5130B, 5230, 5230B, 539, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 631E, 631G, 633E II, 637E, 637G, 69D, 769...
3P7584 PLATE-CLUTCH
844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992C, 992D, 992G, 992K, 994, 994D, D10, D11N, D11R
1943811 PLATE-CLUTCH
993K, 994, 994D, 994F, 994H, D11R, D11T
1261753 PLATE AS
D10R, D11R, D9R
1Q3785 PLATE AS
D10R, D10T, D11R, D9R, D9T
1163119 PLATE
D10R, D11R, D9R
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.