parts catalog

PLATE GP-COVER 5088783 - Caterpillar

5088783 PLATE GP-COVER Caterpillar parts PLATE
Alternative (cross code) number:
Caterpillar 5088783 PLATE GP-COVER

Buy PLATE GP-COVER 5088783 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme:
  For full view, you need register


Procedure to Relocate the Horn Control
Required Parts
Table 1
Item    Quantity    Part Number    Description    
1     1     8R-2916     Cover As    
2     1     214-4701     Rocker Switch    Relocating the Horn Control
Illustration 1 g01520180
Pull up on the 2T-3360 Horn Button Assembly (A) on the 206-1635 Steering Column As in order to access the wiring.
Illustration 2 g01520188
Remove the 8T-6411 Screw (B) and the ground wire (C). Discard these parts.
Pull on wire (D) that comes through the center of the column so that the wire is tight. Then, cut the wire so that the wire retracts into the column.Discard the 2T-3360 Horn Button Assembly (A) .
Install the new 8R-2916 Cover As (1) .
Illustration 3 g01519901
Remove the steering column cover. Unplug wire 200-BLK from wire 320-OR at connection (E) .Then, tape the end of the terminal on wire 320-OR in order to prevent accidental grounding of the horn circuit.
Illustration 4 g01520197
Cut wire 200-BLK from the steering column at the terminal. Cutting the wire will disable the horn completely.
Illustration 5 g01520202
Remove the top of the front console. Remove the blank (F). Discard the blank.
Locate connector FC-C6 on the 213-6040 Console Harness As that is inside the console. The configuration of the connector is identified in Table 2.
Table 2
Connector FC-C6    
Position    Wire Name    Color    
1     -     -    
2     200-FC40     Black    
3     320-FC1     Orange    
4     -     -    
5     -     -    
6     -     -    
7     202-FC26     Black    
8     614-FC43     Purple    
9     -     -    
10     -     -    
Illustration 6 g01520204
Withdraw this connector through the opening in the top of the console. Insert the 214-4701 Rocker Switch (2) into the connector. Then, snap the rocker switch into the opening in the console.
Reassemble the top onto the front console.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.