AVSPARE.COM
parts catalog

PLATE, SUPPORT L.H. 77010077 - Caterpillar



77010077 PLATE, SUPPORT L.H. Caterpillar parts PS-110, PS-130, PS-180 PLATE
Rating:
38
Alternative (cross code) number:
CA77010077
7701-0077
77010077
Caterpillar 77010077 PLATE, SUPPORT L.H.

Buy PLATE, SUPPORT L.H. 77010077 Caterpillar genuine, new aftermarket tractor parts with delivery
PNEUMATIC COMPACTOR,

Compatible equipment models: 77010077:

PNEUMATIC COMPACTOR  PS-110   PS-130   PS-180   Caterpillar
Number on catalog scheme: 1
 
  For full view, you need register

Information:


Illustration 2 g00995145
(1) 0T-0573 Bolt (2) 0S-1588 Bolt (3) 5M-2894 Hard Washer (4) 9S-8752 Full Nut Determine an appropriate location in order to mount the fuel/water separator. Refer to Illustration 2. A template for the mounting holes is provided in Illustration 8. Use the suggested bolts, nuts, and washers in order to attach the filter base. If necessary, use other appropriate hardware in order to attach the filter base. Attach the filter base to the machine or to the mounting bracket. Refer to Table 1 for the parts list.The mounting location for the fuel/water separator will be determined by the application. Ensure that the fuel/water separator is located in an area that can be easily serviced. Ensure that the fuel/water separator is located away from electrical components. Ensure that the fuel/water separator is located away from debris and all hot surfaces.The diameter of the fuel hose will be determined by the application and by the size of the fuel line from the fuel tank. The size of the fuel fittings will be determined by the application. The fuel hose should have a minimum rating of 2100 kPa (300 psi). The fuel hose must be routed away from electrical components and away from hot surfaces. The fuel hose must be routed away from rubbing and away from chafing surfaces.Typical Diagram of Plumbing for a Single Filter Group
Illustration 3 g00995146
This illustration is effective with all of the engine models that are smaller than the 3512 Engines. Typical Diagram of Plumbing for Multiple Single Filter Groups
Illustration 4 g00995148
This illustration is effective with all of the 3512 Engines and up.Note: Connect the fuel/water separators in parallel when two or more fuel/water separators are used. Connecting the fuel/water separators in parallel will require two additional tee fittings. The size of these fittings will be determined by the application and by the size of the fuel line from the fuel tank.For parallel connections, use one tee to split the fuel line from the fuel tank and divide the flow between both of the single filter groups. Use another tee to recombine the outlet lines from the individual filters before the lines reach the fuel pump.This may also require some additional hardware that is not mentioned, including straight fittings and/or elbow fittings. These fittings will be determined by the following factors: the application and the size of the fuel line that is required by the fuel pump.Typical Profile of Installation for 225-6404 Base As
Illustration 5 g00995150
(1) 3B-1915 Bolt (2) 5M-2984 Washer Determine an appropriate location in order to mount the fuel/water separator. Refer to Illustration 5. A template for the mounting holes is provided in Illustration 9. Use the suggested bolts and washers in order to attach the filter base. If necessary, use other appropriate hardware in order to attach the filter base. Attach the filter base to the machine. Refer to Table

Caterpillar parts catalog:

Caterpillar parts catalog
PS-180 PNEUMATIC COMPACTOR 7PD00045-UP (MACHINE) POWERED BY 4.236 ENGINE
PS-110 PNEUMATIC COMPACTOR 7MD00051-UP (MACHINE) POWERED BY 4.236 ENGINE
PS-130 PNEUMATIC COMPACTOR 7ND00121-UP (MACHINE)
PS-130 PNEUMATIC COMPACTOR 7ND00001-00120 (MACHINE)
PS-180 PNEUMATIC COMPACTOR 7PD00001-00044 (MACHINE)


Parts plate Caterpillar catalog:

0676843 PLATE-REAR
206, 212, 416, 426, 428, 436, 438, PS-110
0676301 PLATE
206, 212, 214, 224, 3054, 3056, 312, 426B, AP-1200, CS-323, PS-110, PS-200B
5P9466 PLATE-WARNING
205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 224B, 30/30, 518, 528, 528B, 530B, 572R, 578, 583R, 589, 613B, 613C, 615, 615C, 69D, 768C, 769C, 772B, 773B, 776, 777, 777B, 814B, 815B, 816B, 824C, ...
8C0608 PLATE-CORPORATE SYMBOL
12G, 130G, 140G, 508, 621B, 916, 926, 936, 950B, 950B/950E, 966C, 966D, 980C, CB-414, CB-514, CB-534, CB-614, CP-433B, CS-551, D7H, D8L, D9N, E450, G936, IT18, IT18B, IT28B, PS-110, PS-180, RR-250
0691179 PLATE
AP-800, PS-110
7C4631 PLATE
CS-323, PS-110
59000137 PLATE, SPACER
CB-414, CB-514, CB-614, CS-431, CS-433, PS-110, PS-130, PS-180
A073801 PLATE, RETAINER
PS-110, PS-130, PS-180
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.