AVSPARE.COM
parts catalog

PLATE 9V9341 - Caterpillar



9V9341 PLATE Caterpillar parts 215B, 225, 225D, 229, 231D PLATE
Rating:
39
Alternative (cross code) number:
CA9V9341
9V-9341
9V9341
Caterpillar 9V9341 PLATE
Weight: 0.30 pounds 0 kg.

Buy PLATE 9V9341 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 9V9341:

EXCAVATOR  215B   225   225D   229   231D   Caterpillar
Number on catalog scheme: 24
 
  For full view, you need register

Information:


Table 1
Maximum Inlet Manifold Air Temperatures for G3400 Engines
Aspiration Water Temperature Regulator Maximum Inlet Manifold Air Temperature
Naturally aspirated n/a 25 °C (77 °F) (1)
Separate Circuit Aftercooling 32 °C (90 °F) (2) 43 °C (110 °F)
Separate Circuit Aftercooling 54 °C (130 °F) (2) 65 °C (150 °F)
(1) This temperature is for an engine at an altitude of 152 m (500 ft) above sea level. A greater temperature or a higher altitude requires derating.
(2) Water inlet to the aftercooler
Inlet Manifold Air Pressure (TA Engines) and Inlet Manifold Vacuum (NA Engines) - For TA engines, this gauge indicates the air pressure (turbocharger boost pressure) in the air plenum (air inlet manifold) after the aftercooler. For NA engines, this gauge is the pressure of the inlet manifold vacuum. For all engines, this pressure is relative to the load. This pressure may be used for estimating power output. Several factors affect the inlet manifold air pressure. All of these factors must be accounted for when power is estimated from inlet manifold air pressure: air restriction, exhaust restriction, coolant temperature, ambient air temperature, variation of the fuel, air/fuel ratio, ignition timing and condition of the valves.For more information, see the performance curves in the Engine Performance manual. The manual is available from your Caterpillar dealer.
Tachometer - This gauge indicates the engine rpm.
An overspeed can result in serious damage to the engine. To help prevent engine damage, never allow the engine to exceed the rated rpm.
Note: The rated rpm is stamped on the engine Information Plate.
Service Hour Meter - This meter indicates the total number of service meter units that have been operated on the engine. Table 2 lists the factors for converting service meter units to clock hours.
Table 2
Factors for Converting Service Meter Units to Clock Hours
Operating Speed Factor
Engines That Are Rated From 1000 RPM to 1400 RPM
1000 rpm 1.200
1200 rpm 1.000
1400 rpm 0.857
Engines That Are Rated From 1500 RPM to 1800 RPM
1500 rpm 1.200
1600 rpm 1.125
1800 rpm 1.000 For example, an engine that is rated at 1800 rpm has been operating at 1500 rpm. To determine the number of clock hours, multiply the number of service meter units by the correct factor. In this example, one service meter unit is equivalent to 1.200 clock hours.
Fuel Filter Differential Pressure - This gauge is provided by the customer. This gauge indicates the difference in fuel pressure between the inlet side and the outlet side of the fuel filter. As the fuel filter element becomes plugged, the difference in pressure between the two sides of the fuel filter increases. Service the fuel filter when the fuel filter differential pressure reaches 34 kPa (5 psi).
Air Cleaner Differential Pressure - This gauge indicates the difference in air pressure between the inlet side and the engine side of the air filter element. The pressure is measured from the turbocharger air inlet. As the air filter element becomes plugged, the difference in pressure between the two sides of the air cleaner element will increase. For optimum engine

Caterpillar parts catalog:

Caterpillar parts catalog
215B EXCAVATOR 2XC00001-UP (MACHINE) POWERED BY 3204 ENGINE
215B EXCAVATOR 9YB00001-UP (MACHINE) POWERED BY 3304 ENGINE
215B SA EXCAVATOR 4FC00001-UP (MACHINE) POWERED BY 3304 ENGINE
225 EXCAVATOR 51U02832-UP (MACHINE) POWERED BY 3208 ENGINE
225B LC 229 EXCAVATORS 1GF00001-UP (MACHINE) POWERED BY 3208 ENGINE
225 EXCAVATOR 76U03765-UP (MACHINE) POWERED BY 3304 ENGINE
225D EXCAVATOR 2SJ00001-UP (MACHINE) POWERED BY 3208 ENGINE
231D EXCAVATOR 1NK00001-UP (MACHINE) POWERED BY 3208 ENGINE
231D & 231D LC EXCAVATOR 5WJ00001-UP (MACHINE) POWERED BY 3208 ENGINE
225B & 229 EXCAVATORS 1AG00001-UP (MACHINE) POWERED BY 3304 ENGINE
229D EXCAVATOR 2LJ00001-UP (MACHINE) POWERED BY 3304 ENGINE
225D LC EXCAVATOR 6RG00001-UP (MACHINE) POWERED BY 3304 ENGINE


Parts plate Caterpillar catalog:

4T9425 PLATE-ISOLATION
225, 227, 235, 235B, 235D, 245, 320B FM LL, 325B L, 325C, 330B L, 330C L, 5130, 5130B, 5230, 5230B, 539, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 631E, 631G, 633E II, 637E, 637G, 69D, 769...
4T9426 PLATE-ISOLATION
225, 227, 235, 235B, 235D, 245, 320B FM LL, 325B L, 325C, 330B L, 330C L, 5130, 5130B, 5230, 5230B, 539, 621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G, 631E, 631G, 633E II, 637E, 637G, 69D, 769...
4T8764 PLATE-PRESSURE
225, 227, 235B, 245, 834G, 834H, 836G, 836H, 980F, 994, 994D
9V7575 PLATE-RETAINER
235C, 235D, 245, 245B, 245D
4V9339 PLATE
245, 245B, 245D
4V9333 PLATE
245, 245B, 245D
4V9364 PLATE
245, 245B, 245D
4V9365 PLATE
245, 245B, 245D
4T8729 PLATE-PRESSURE
225, 227, 235, 235B, 235D, 245, 320B FM LL, 325B L, 325C, 330B L, 330C L, 539, 631E, 637E, 639D, 651E, 657E, 657G, 69D, 769C, 769D, 771C, 771D, 772B, 773B, 773D, 773E, 775B, 775D, 775E, 776C, 776D, 77...
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.