PLATE A-RH 9V9379 - Caterpillar

2. Disconnect oil lines (1), (2), (3) and (4) from steering metering pump (5). 3. Remove ring (6) from the coupler. Remove pin (7) that holds the coupler to the steering shaft.
Typical Example4. Remove four bolts (8) from inside the cab that hold the steering metering pump in place. Remove the steering metering pump. The following steps are for installation of the steering metering pump.5. Put steering metering pump (5) in position on the machine. Make sure the coupler slides on the steering shaft.6. Install pin (7) that holds the coupler to the steering shaft.7. Install ring (6) to hold the pin in place.8. Install four bolts (8) from the inside of the cab to hold the steering metering pump in place. Oil lines (1) and (2) are from the steering cylinders. Oil line (3) is from the steering system hydraulic tank. Oil line (4) is from the steering pump.9. Connect oil lines (1), (2), (3) and (4) to the steering metering pump.10. Install the cover on the front of the cab.