PLATE A-LH 9V9568 - Caterpillar

2. Disconnect harness (1).3. Remove nut (2), washer (3), coil assembly (4), and washer (5).4. Remove cartridge assembly (7). Remove O-rings (6) and (8) from cartridge assembly (7). The following steps are for installation of the accumulator bleed valve.5. Install O-rings (6) and (8) on cartridge assembly (7). Install cartridge assembly (7) and tighten it to a torque of 24.0 2.7 N m (17.7 2.0 lb.ft.).6. Install washer (5), coil assembly (4), washer (3), and nut (2). Tighten nut (2) to a torque of 14 2 N m (10 1.5 lb.ft.).7. Connect harness (1).8. Fill the steering system hydraulic tank with oil to the correct level. See the Maintenance Guide.