AVSPARE.COM
parts catalog

PLATE A LH 9V9618 - Caterpillar



9V9618 PLATE A LH Caterpillar parts PLATE
Rating:
81
Alternative (cross code) number:
CA9V9618
9V-9618
9V9618
Caterpillar 9V9618 PLATE A LH
Weight: 1 pounds 0 kg.

Buy PLATE A LH 9V9618 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

1. Fasten a hoist and two nylon straps to rear axle stabilizer rod (2).2. Disconnect two lubrication lines (1). Remove the bolts, nuts (4) and washers (3) from each end of the stabilizer rod. 3. Remove pins (6) from each end of the stabilizer rod. Remove rear axle stabilizer rod (2) from the machine. The weight of the rear axle stabilizer rod is 151 kg (334 lb.).4. If necessary, remove two rings (5) from each end of the stabilizer rod. Use a press and tool (A) to remove bearings (7) from the stabilizer rod. The following steps are for installation of the rear axle stabilizer rod.5. If bearings (7) were removed from the stabilizer rod, put one ring (5) in position in the rear axle stabilizer rod.6. Use tooling (A) and a press, and install bearing (7) in the stabilizer rod until it seats against ring (5). Install the remaining ring (5).7. Fasten a hoist and two nylon straps to rear axle stabilizer rod (2). Put the stabilizer rod in position, and install two pins (6).8. Put washers (3) in position on each end of the pins, and install the bolts and nuts (4).9. Connect two lubrication lines (1).


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.