AVSPARE.COM
parts catalog

PLUG AS-CONN 4647370 - Caterpillar



4647370 PLUG AS-CONN Caterpillar parts PLUG
Rating:
76
Alternative (cross code) number:
CA4647370
464-7370
4647370
Caterpillar 4647370 PLUG AS-CONN
Weight: 0.71 pounds 0 kg.

Buy PLUG AS-CONN 4647370 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-9200     Lever Puller Hoist     1    
B     138-7573     Link Bracket     2    Start By:
Remove the left side track brake. Refer to Disassembly and Assembly, "Track Brake - Remove".
Remove the Cab. Refer to Disassembly and Assembly, "Cab - Remove and Install".Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.Note: Cleanliness is an important factor. Before you begin the removal procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01334661
Disconnect hoses (1). Remove bolts (2) .
Illustration 2 g01334690
Disconnect hose assembly (3) .
Illustration 3 g01334691
Remove cover (4) .
Illustration 4 g01334698
Remove hose assembly (5). Disconnect hose assembly (6). Disconnect harness assembly (7) .
Illustration 5 g01334720
Remove nuts (8) .
Illustration 6 g01334735
Connect Tooling (A) and Tooling (B) to hydraulic tank (9). The weight of the hydraulic tank is 99 kg (219 lb).
Illustration 7 g01334770
Disconnect tube assembly (10). Remove bolts (11) .
Illustration 8 g01334789
Disconnect hose assembly (12). Remove bolts (13). Remove bracket (14) .
Remove hydraulic tank (9) .


Parts plug Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.