AVSPARE.COM
parts catalog

PLUG AS-CONN 4647371 - Caterpillar



4647371 PLUG AS-CONN Caterpillar parts PLUG
Rating:
81
Alternative (cross code) number:
CA4647371
464-7371
4647371
Caterpillar 4647371 PLUG AS-CONN
Weight: 0.04 pounds 0 kg.

Buy PLUG AS-CONN 4647371 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-9200     Lever Puller Hoist     1    
B     138-7573     Link Bracket     2    Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement. Dirt and other contaminants can damage the precision component. Perform assembly procedures on a clean work surface. Keep components covered and protected at all times.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01334735
Illustration 2 g01334789
Connect Tooling (A) and Tooling (B) to hydraulic tank (9). The weight of hydraulic tank (9) is 99 kg (219 lb).
Install hydraulic tank (9). Install bracket (14) .
Install bolts (13). Tighten bolts (13) to a torque of 100 20 N m (74 15 lb ft).
Connect hose assembly (12) .
Illustration 3 g01334770
Install bolts (11). Tighten bolts (11) to a torque of 100 20 N m (74 15 lb ft).
Connect tube assembly (10) .
Illustration 4 g01334720
Install nuts (8). Tighten nuts (8) to a torque of 100 20 N m (74 15 lb ft).
Illustration 5 g01334698
Connect harness assembly (7). Connect hose assembly (6). Install hose assembly (5) .
Illustration 6 g01334691
Install cover (4) .
Illustration 7 g01334690
Connect hose assembly (3) .
Illustration 8 g01334661
Install bolts (2). Connect hose assembly (1) .End By:
Install the Cab. Refer to Disassembly and Assembly, "Cab - Remove and Install".
Install the left side track brake. Refer to Disassembly and Assembly, "Trake Brake - Remove".


Parts plug Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.