1695551 POWER TRAIN AR Caterpillar parts 312C L POWER
Rating:
Alternative (cross code) number:
CA1695551
169-5551
1695551
CA1695551
169-5551
1695551
EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Oregon 99-132 BLADE SNAPPER 16-1/8 IN 99-132
Oregon Center hole: 3/4" || Requires 3 blades for 46" cut || Superior mulching for bagging and discharge efficiency || Enhanced hardening to keep the blade sharper and more durable || Made to exact OEM specifications; Replaces major brands: Murray and Massey Ferguson
Oregon Center hole: 3/4" || Requires 3 blades for 46" cut || Superior mulching for bagging and discharge efficiency || Enhanced hardening to keep the blade sharper and more durable || Made to exact OEM specifications; Replaces major brands: Murray and Massey Ferguson
For full view, you need register
Compatible equipment models: 1695551:
EXCAVATOR 312C L
Caterpillar
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 278-4138 Fuel System Protection Gp(1) 1
(1) This tool can only be used one time.
Do not open the high pressure fuel system without allowing the fuel system to purge. After the engine has shut down, allow the fuel system to purge for ten minutes. This operating fuel system contains high pressure. Exposure to high pressure fuel can result in personal injury.
Note: Use Caterpillar Electronic Technician (ET) to verify that the fuel system pressure is at zero before opening the fuel system.Note: Use Tooling (A) after any fuel line has been disconnected.
Illustration 1 g02858822
Remove the fuel injection lines (1).
Disconnect hose (2) and harness assembly (3).
Disconnect tube assemblies (4).
Remove bolts (5) to remove fuel injection manifold (6).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 278-4138 Fuel System Protection Gp(1) 1
(1) This tool can only be used one time.
Do not open the high pressure fuel system without allowing the fuel system to purge. After the engine has shut down, allow the fuel system to purge for ten minutes. This operating fuel system contains high pressure. Exposure to high pressure fuel can result in personal injury.
Note: Use Caterpillar Electronic Technician (ET) to verify that the fuel system pressure is at zero before opening the fuel system.Note: Use Tooling (A) after any fuel line has been disconnected.
Illustration 1 g02858822
Remove the fuel injection lines (1).
Disconnect hose (2) and harness assembly (3).
Disconnect tube assemblies (4).
Remove bolts (5) to remove fuel injection manifold (6).
Caterpillar SIS machinery equipment:
Caterpillar SIS
- 312C & 312C L Excavators CBA00001-01200 (MACHINE) » 169-5551 POWER TRAIN AR
- 312C & 312C L Excavators CBA01201-UP (MACHINE) POWERED BY 3064 Engine » 169-5551 POWER TRAIN AR