POWER TRAIN AR 4645073 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01238444
Position combination valve (5) and install bolts (6). Connect tube assemblies (3) and (4). Connect hose assemblies (2).
Illustration 2 g01238443
Use two people in order to position panel assembly (1). The weight of panel assembly (1) is approximately 27 kg (60 lb). Install panel assembly (1). End By:
Separate steering frame lock. Refer to Disassembly and Assembly , "Steering Frame Lock - Seperate and Connect".