parts catalog

RACE (INNER) 2H9060 - Caterpillar

2H9060 RACE (INNER) Caterpillar parts 515, 525, D364 RACE
Alternative (cross code) number:
Caterpillar 2H9060 RACE (INNER)
Weight: 0.20 pounds 0 kg.

Buy RACE (INNER) 2H9060 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 2H9060:

WHEEL SKIDDER  515   525   Caterpillar
Number on catalog scheme: None
  For full view, you need register


At operating temperature, the hydraulic oil tank is hot and under pressure. Hot oil can cause burns. To prevent possible personal injury, release the pressure in the hydraulic system before and hydraulic lines or components are disconnected or removed.
3. Release the pressure in the hydraulic system as follows: a. Shut off the engine.b. Move the control levers through their full travel strokes. This will relieve any pressure that may be present in the pilot system.c. Slowly loosen the air breather cap on the hydraulic oil tank to release the pressure.d. Tighten the air breather cap on the hydraulic oil tank.e. The pressure in the hydraulic system has now been released. Lines and components can now be removed. To release the pressure in the attachment cylinders, carefully loosen the two large plugs near the plugs at the top of the loader frame. When the oil from the loosened plugs stops draining, tighten the two large plugs. Lower bucket on solid surface to remove pressure on pin assemblies. 4. Remove bolt, washer and spacer (1) and pin assembly (2).5. Disconnect tilt cylinder (3) from tilt lever (4). 6. Remove bolt, washer and spacer (5) and pin assembly (6).7. Disconnect tilt link (7) from tilt lever (4). 8. Attach strap and suitable lifting device to tilt lever (4).9. Remove bolt, washer and spacer (8) and pin assembly (9).10. Remove tilt lever (4). The weight of the lever assembly is 46 kg (101 lb). Lubricate pins with 5P0960 Multipurpose Grease before installation. Install in the reverse order.11. Fill the hydraulic oil tank with oil to the correct level. See the Operation & Maintenance Manual for the correct filling procedure.12. Separate the steering frame lock link. See "Separate & Connect Steering Frame Lock Link" in this module.

Caterpillar parts catalog:

Caterpillar parts catalog
D364 MARINE ENGINE 20B00056-00102
525 Wheel Skidder 1DN00001-02253 (MACHINE) POWERED BY 3304 Engine
515 Wheel Skidder 4LR00001-UP (MACHINE) POWERED BY 3304 Engine

Parts race Caterpillar catalog:

2H6489 RACE
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H,...
16G, 245, 3406B, 578, 613, 613C, 613C II, 621E, 623E, 627E, 824C, 826C, 980C, SS-250
16, 651, 657, 657B, 7211, 725, 725C, 730, 730C, 735, 735B, 740, 740B, 769, 772, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 824B...
0057310 RACE
508, 7211, D10N, D10R, D10T
8H0892 RACE
3192, 583H, D8H
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.