AVSPARE.COM
parts catalog

RADIATOR HOSE 1C3902 - Caterpillar



1C3902 RADIATOR HOSE Caterpillar parts RADIATOR
Rating:
86
Alternative (cross code) number:
CA1C3902
1C-3902
1C3902
Caterpillar 1C3902 RADIATOR HOSE
Weight: 2 pounds 0 kg.

Buy RADIATOR HOSE 1C3902 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Introduction
THE 6V4945 ROLLER BUFFER HAS BEEN DESIGNED TO ACT AS A PERIPHERAL COMPONENT IN THE MODEL "W" ROLLER/IDLER REBUILDING SEQUENCE.AFTER THE BULK OF THE DIRT AND GRIT HAS BEEN REMOVED FROM A ROLLER THROUGH EITHER STEAM CLEANING OR HIGH PRESSURE JET SYSTEM, THE ROLLER BUFFER WILL ACCOMPLISH THE FINAL CLEANING OPERATION BEFORE IT GOES TO THE WELDING UNIT FOR REBUILDING.Installation/Maintenance
Installation
The Roller Buffer is shipped completely assembled. After checking to be certain that the equipment was not damaged during shipment, locate the unit so that it fits into the repair shop's work flow system.IN ORDER TO PUT THE ROLLER BUFFER INTO SERVICE:1. Level the unit using the adjustment bolts on the legs.2. Have a qualified electrician connect the proper electrical supply to the unit.Maintenance
The Roller Buffer requires very little maintenance as long as it is not abused. However, it is necessary to:1. Clean the dust out of the roller on a daily basis.2. Replace the cleaning brushes as needed; normal wear should be approximately six months.3. Replace the drive belt as needed.4. Grease the roller bearing blocks every week. THE ILLUSTRATION SHOWS A POSSIBLE WORK FLOW SYSTEM WHICH INCLUDES THE END COLLAR PULLER, DIP TANK AND THE MODEL "W". YOU SHOULD PLACE YOUR MACHINE TO FIT YOUR PARTICULAR NEEDS.Operational Instructions
Cleaning Crawler Tractor Rollers For Rebuilding
For the roller to be properly rebuilt, it should be thoroughly precleaned of dirt and rust particles on the critical areas such as the tread running surface and the flange areas, as well as the seal end of the end collars.The first cleaning operation should be a steam cleaning process to remove the majority of the dirt from the critical areas of the roller. This procedure, followed by the use of the Roller Buffer, will minimize the chances of contamination to the seal area when the end collars are removed (by


Parts radiator Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.