1246704 RESISTOR AS Caterpillar parts 5130B, 5230B, 69D, 769D, 771D, 773D, 773E, 775D, 775E, 776D, 777D, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 793C, 793D, 797, 797B, 854G, 992G, 994D, D11R RESISTOR
Rating:
Alternative (cross code) number:
CA1246704
124-6704
1246704
CA1246704
124-6704
1246704
Weight: 0.17 pounds 0 kg.
Buy RESISTOR AS 1246704 Caterpillar genuine, new aftermarket tractor parts with delivery
MINING EXCAVATOR, WHEEL LOADER,
Compatible equipment models: 1246704:
Information:
Assembly Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.Note: Lubricate the O-ring seals with the oil that is being used.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01004839Note: Make sure that you do not damage the tubes in engine oil cooler core (3) during the cleaning.
Make sure that the tubes in engine oil cooler core (3) are clean.
Illustration 2 g01253217
Install the O-ring seal and cover (14), if necessary.
Install the O-ring seal and drain plug (15), if necessary.
Install the gasket and bonnet (6) on engine oil cooler core (3) in the orientation that was noted during the disassembly procedure. Install the bolts.
Illustration 3 g01004704
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install bypass valve (12) and spring (11) in elbow (5). Install O-ring seal (10) and lubricate the O-ring seal with clean engine oil. Install cover (9) and bolts (13).
Illustration 4 g01004658
Install the O-ring seals on tube (7) and lubricate the O-ring seals with clean engine oil. Install tube (7) and flange (8) on bonnet (6).
Install the O-ring seal on elbow (5) and install elbow (5) on the engine oil cooler with the bolts.
Illustration 5 g01004559
Install the gasket and bonnet (4) on engine oil cooler core (3) in the location that was marked during the disassembly procedure. Install the bolts in bonnet (4).
Illustration 6 g01004313
Install the O-ring seals on both ends of tube (2). Lubricate the O-ring seals with clean engine oil. Install tube (2) in elbow (1).
Install the O-ring seal on elbow (1) and lubricate the O-ring seal with clean engine oil. Install elbow (1) and tube (2) with the bolts on the engine oil cooler core. End By:
Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.Note: Lubricate the O-ring seals with the oil that is being used.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01004839Note: Make sure that you do not damage the tubes in engine oil cooler core (3) during the cleaning.
Make sure that the tubes in engine oil cooler core (3) are clean.
Illustration 2 g01253217
Install the O-ring seal and cover (14), if necessary.
Install the O-ring seal and drain plug (15), if necessary.
Install the gasket and bonnet (6) on engine oil cooler core (3) in the orientation that was noted during the disassembly procedure. Install the bolts.
Illustration 3 g01004704
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install bypass valve (12) and spring (11) in elbow (5). Install O-ring seal (10) and lubricate the O-ring seal with clean engine oil. Install cover (9) and bolts (13).
Illustration 4 g01004658
Install the O-ring seals on tube (7) and lubricate the O-ring seals with clean engine oil. Install tube (7) and flange (8) on bonnet (6).
Install the O-ring seal on elbow (5) and install elbow (5) on the engine oil cooler with the bolts.
Illustration 5 g01004559
Install the gasket and bonnet (4) on engine oil cooler core (3) in the location that was marked during the disassembly procedure. Install the bolts in bonnet (4).
Illustration 6 g01004313
Install the O-ring seals on both ends of tube (2). Lubricate the O-ring seals with clean engine oil. Install tube (2) in elbow (1).
Install the O-ring seal on elbow (1) and lubricate the O-ring seal with clean engine oil. Install elbow (1) and tube (2) with the bolts on the engine oil cooler core. End By:
Install the engine oil cooler. Refer to Disassembly and Assembly, "Engine Oil Cooler - Install".
Cat SIS web machinery list:
Parts resistor Caterpillar catalog:
1259740
RESISTOR
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 24M, 312B L, 315B L, 320B, 322B L, 322B LN, 325B L, 330B L, 345B L, 525C, 535C...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD, 16M, 24M, 312B L, 315B L, 320B, 322B L, 322B LN, 325B L, 330B L, 345B L, 525C, 535C...
6T2217
RESISTOR AS
120G, 120H, 120H NA, 12G, 12H ES, 12H NA, 130G, 135H NA, 140G, 140H ES, 140H NA, 143H, 14G, 160G, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 517, 527, 578, 589, 611, 613C, 613C II, 615C, 621E, 621F, 623E...
120G, 120H, 120H NA, 12G, 12H ES, 12H NA, 130G, 135H NA, 140G, 140H ES, 140H NA, 143H, 14G, 160G, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 517, 527, 578, 589, 611, 613C, 613C II, 615C, 621E, 621F, 623E...
1435122
RESISTOR AS
784C, 785C, 785D, 789D, 834H, 836H, 988H
784C, 785C, 785D, 789D, 834H, 836H, 988H
8T9737
RESISTOR
586C, 769C, 785D, 992C, D10N, D8R
586C, 769C, 785D, 992C, D10N, D8R
1646358
RESISTOR AS
784C, 785C, 789C, 797, 797B
784C, 785C, 789C, 797, 797B
3522018
RESISTOR AS
785C, 785D, 789C, 793D, 793F, 793F CMD, 793F-XQ, 795F AC, 797B, 797F
785C, 785D, 789C, 793D, 793F, 793F CMD, 793F-XQ, 795F AC, 797B, 797F
3T9592
RESISTOR
789C, 793F-XQ
789C, 793F-XQ
1646357
RESISTOR AS
797, 797B
797, 797B
3577100
RESISTOR
777G, 785D
777G, 785D
3521143
RESISTOR
773G OEM, 775G OEM, 777G, 785D
773G OEM, 775G OEM, 777G, 785D
9X3208
RESISTOR AS
777B, 785, 789, D11N
777B, 785, 789, D11N
3E9041
RESISTOR
5130B
5130B
1353311
RESISTOR AS
824K, 825K, 826K, 834B, 834K, 836, 836K, 854K, 988K, 992K
824K, 825K, 826K, 834B, 834K, 836, 836K, 854K, 988K, 992K
5G3801
RESISTOR
910
910
4K0899
RESISTOR
613
613
3331387
RESISTOR AS
924K, 930K, 938K
924K, 930K, 938K
2753993
RESISTOR
906H, 906H2, 907H, 907H2, 908H, 908H2, 910K, 914K
906H, 906H2, 907H, 907H2, 908H, 908H2, 910K, 914K
9X0156
RESISTOR
924G
924G
1V8499
RESISTOR
988B
988B
3634996
RESISTOR
824K, 825K, 826K, 834K, 836K, 844K, 854K, 988K, 990K, 992K, 993K, 994H
824K, 825K, 826K, 834K, 836K, 844K, 854K, 988K, 990K, 992K, 993K, 994H
3634995
RESISTOR
824K, 825K, 826K, 834K, 836K, 844K, 854K, 988K, 990K, 992K, 993K, 994H
824K, 825K, 826K, 834K, 836K, 844K, 854K, 988K, 990K, 992K, 993K, 994H
8T9737
RESISTOR
586C, 769C, 785D, 992C, D10N, D8R
586C, 769C, 785D, 992C, D10N, D8R
2288989
RESISTOR AS
2470C, 2864C, 553C, 586C, 854K, 992K, 993K
2470C, 2864C, 553C, 586C, 854K, 992K, 993K
1435122
RESISTOR AS
784C, 785C, 785D, 789D, 834H, 836H, 988H
784C, 785C, 785D, 789D, 834H, 836H, 988H