AVSPARE.COM
parts catalog

RETAINER 9W0634 - Caterpillar



9W0634 RETAINER Caterpillar parts 508, 517, D4HTSK II, D4HTSK III RETAINER
Rating:
39
Alternative (cross code) number:
CA9W0634
9W-0634
9W0634
Caterpillar 9W0634 RETAINER
Weight: 0.35 pounds 0 kg.

Buy RETAINER 9W0634 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK SKIDDER, WHEEL SKIDDER,

Compatible equipment models: 9W0634:

TRACK SKIDDER  517   D4HTSK II   D4HTSK III  
WHEEL SKIDDER  508   Caterpillar
Number on catalog scheme: 68
 
  For full view, you need register

Information:

Removal Procedure
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.Note: The boom lowering control valve is mounted on the boom cylinder.
Start the machine, and fully extend the stick. Lower the stick to the ground.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System Pressure - Release".
Drain the hydraulic oil from the hydraulic system into a suitable container for storage or disposal.
Illustration 1 g00616326
Typical Example
Remove hose assemblies (1).
Oil will drain from the hose assemblies and the tube assemblies when the assemblies are disconnected. Place a drip pan under the boom lowering control valve in order to contain the oil.
Disconnect tube assembly (2) and tube assembly (5) from the boom lowering control valve.
Put plugs in the ends of the hose assemblies. Plugs prevent oil loss. Plugs prevent contamination of the hydraulic system.
Remove bolts (3) that mount the boom lowering control valve to the boom cylinder.
Remove boom lowering control valve (4) from the machine. Remove the O-ring seal that is used between the boom lowering control valve and the boom cylinder.

Caterpillar parts catalog:

Caterpillar parts catalog
D4H Track-Type Skidder Series II 8ZF00001-UP (MACHINE) POWERED BY 3204 Engine
D4H Series III Track-Type Skidder 7PK00001-UP (MACHINE) POWERED BY 3304 Engine
517 TRACK-TYPE SKIDDER Grapple 5WW00001-UP (MACHINE) POWERED BY 3304 Engine
508 SKIDDER AND GRAPPLE SKIDDER 2HD00001-UP (MACHINE) POWERED BY 3204 ENGINE


Parts retainer Caterpillar catalog:

7H9678 RETAINER-ELEMENT
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 16, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 16G, 16H NA, 205B, 214B, 215, 215B, 224B, 235, 235B, 245, 3114,...
1S9543 RETAINER-PIN
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673, 1673C, 1674, 1676, 225, 235, 235B, 330, 330 FM L, 330 L, 3304, 3304B...
7N9035 RETAINER
12H, 12H ES, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 235B, 245, 330, 330 FM L, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B, 330B L, 3406, 3406B,...
9S2390 RETAINER
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA, 16G, 16H, 16H NA, 235, 2...
8M1013 RETAINER
14E, 24H, 24M, 30/30, 517, 518, 518C, 527, 561M, 572G, 572R II, 578, 583R, 587R, 587T, 589, 594, 611, 613, 613B, 613C, 613C II, 613G, 615, 615C, 65, 651E, 657B, 657E, 65C, 65E, 7211, 75, 75C, 75D, 75E...
1W4260 RETAINER-SPRING
215, 3204, 3208, 926, 931B, 943, 953, CS-551, D4HTSK II, E180, PS-500
4T0231 RETAINER
30/30, 517, 527, 561H, 561M, 561N, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D5N, D5R LGP, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, D6M, D6N, D6N LGP, DEUCE, PL61, PL83, PL87
8E4092 RETAINER
D4HTSK III, D5H, D5H XL, D5HTSK II, D5R LGP, D6M, D6N, D6N LGP, D6N OEM
9G9349 RETAINER
517, 527, D5HTSK II, D6H, D6H XL, D6H XR, D6R, OEMS
8D8372 RETAINER AS
120G, 12G, 130G, 140G, 14G, 160G, 16G, FB518
8D5401 RETAINER
120G, 12G, 130G, 140G, 14G, 160G, 16G, FB518
8E3488 RETAINER
518, 527, D5HTSK II
9X1716 RETAINER
518, D4HTSK II, D4HTSK III, D5HTSK II
3T7178 RETAINER
508, 517, D4HTSK II, D4HTSK III
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.