RING, RETAINING 62000049 - Caterpillar

Illustration 4 g01959762Read the service manual before you perform any maintenance on the air conditioner.Alternate Exit (2)This message is located on the door latch for the right door.
Illustration 5 g01002993If the primary exit is blocked, exit the machine through the door on the right side of the machine.Do Not Weld and Do Not Drill. (3)This message is located on the left hand side of the front frame.
Illustration 6 g01175166Do not weld or drill the frame. Refer to Operation and Maintenance Manual, "Guards (Operator Protection)" for more information.Alternate Exit (4)If your machine is equipped with a snow wing, this message is located on the left ROPS support at the rear of the operator's compartment.
Illustration 7 g01911433If the primary exits are blocked, use the hammer to break the window. Exit the machine through the window.Cat Extended Life Coolant (ELC) (5)This message is located on the underside of the radiator cap access cover on top of the engine compartment.
Illustration 8 g01132922Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" and Operation and Maintenance Manual, "Cooling System Coolant Extender (ELC) - Add" for more information.Data Privacy (6)This message is located in the cab on the left post.
Illustration 9 g01418953Fuel Filler (7)This message is located on the fuel tank near the fast fill fuel adapter.
Illustration 10 g01175158
Use only a Caterpillar approved fast fill system to fuel machines. Over pressurization may cause tank deformation and fuel spillage.Contact your Cat dealer for fast fill system availability.
Refer to Operation and Maintenance Manual, "Fuel System - Fill" for more information.Articulation Bearing (8)This message is located on the front left side of the top hitch assembly near the grease points for the articulation bearing.
Illustration 11 g01261194Hydraulic System Oil (9)This message is located near the hydraulic tank filler cap. A grease pen may be used on the left hand side of this film to write down the current hydraulic oil viscosity.Refer to Operation and Maintenance Manual, "Monitoring System" and Operation and Maintenance Manual, "Hydraulic System Oil - Change" for more information to ensure that the correct oil type is selected in Messenger .
Illustration 12 g0163700624 V (10)This message is located near the auxiliary start receptacle.
Illustration 13 g01183244Engine Oil Drain (11)This message is located at the left rear of the machine near the drain valve for the engine oil.
Illustration 14 g01161760Hydraulic Tank Drain (12)This message is located at the left rear of the machine near the drain valve for the hydraulic system.
Illustration 15 g01261324