parts catalog

RIVET 2H9515 - Caterpillar

2H9515 RIVET Caterpillar parts 630A RIVET
Alternative (cross code) number:
Caterpillar 2H9515 RIVET
Weight: 0.08 pounds 0 kg.

Buy RIVET 2H9515 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 2H9515:

WHEEL SCRAPER  630A   Caterpillar
Number on catalog scheme: None
  For full view, you need register


Illustration 1 g00764091
Schematic of the Transmission Clutch (Solenoid 3)Note: The approximate coil resistance of the solenoid is 8.7 .4 ohms at 25 °C (77.0 °F).This diagnostic code is recorded when the ECM reads the current of the solenoid circuit as being below normal range (open circuit).Note: This procedure can cause new diagnostic codes to be recorded. Ignore these created diagnostic codes. Complete the following procedure. Then clear the created diagnostic codes.Test Step 1. CHECK THE SOLENOID.
Turn the disconnect switch and the key start switch to the ON position. Do not start the engine. Ensure that the diagnostic code for the solenoid is active.
Disconnect the machine harness from the solenoid.
At the machine harness connector for the solenoid that is being tested, install a jumper wire. Install the jumper wire from contact 1 (wire 754-BU) to contact 2 (wire 922-BR).
Observe the status of the

Caterpillar parts catalog:

Caterpillar parts catalog
630 SCRAPER 60F00001-00075 (MACHINE)

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.