ROD AS 4Z6386 - Caterpillar

Illustration 1 g03587430Turn the engine start switch to the ON position. After approximately one second, the Cat® logo appears in the display and the action lamp turns on. The fuel level, hydraulic oil temperature, coolant temperature, and position of the engine speed dial are now indicated. The monitoring system checks the level of the engine coolant, engine oil, and hydraulic oil before the engine starts. If a low fluid level is detected during the fluid level check, the appropriate message will be displayed.Note: If more than one fluid level is low, the right and left key symbols will be indicated in the bottom right area of the warning message indicator. Press the right arrow key or the left arrow key to check other indicated warning messages. When the engine is started, the low fluid level indicators will disappear after 5 seconds.Note: The machine cannot perform an accurate fluid level check when the machine is on a slope. Perform the fluid level check on level ground.The monitor will cancel the fluid level check if the engine is started while the fluid level check is being performed. The service hours for the filters are checked first. Next, the service hours for fluids are checked. If a filter or a fluid is over the recommended change interval, "Check Fltr/Fluid Info" appears on the display. Refer to the Main Menu for further information.