AVSPARE.COM
parts catalog

Roller, needle 77050007 - Caterpillar



77050007 Roller, needle Caterpillar parts Roller
Rating:
42
Alternative (cross code) number:
CA77050007
7705-0007
77050007
Caterpillar 77050007 Roller, needle

Buy Roller, needle 77050007 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 35
 
  For full view, you need register

Information:


Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Refer to the Operation and Maintenance Manual, "Access Doors and Covers" for the location of the service points.Clean the area around the drain plug for the differential and the transmission before removing the drain plug. Clean the area around the dipstick/fill cap before removing the dipstick/fill cap. Operate the engine until the transmission and differential oil is warm. Park the machine on a level surface and engage the parking brake. Lower the blade and apply slight down pressure to the blade. Stop the engine.Note: Drain the transmission and differential case while the oil is warm. This allows waste particles that are suspended in the oil to drain. As the oil cools, the waste particles will settle to the bottom of the case. The particles will not be removed by draining the oil and the particles will recirculate in the lubrication system with the new oil.
Illustration 1 g00986407
Remove drain plug (1) for the differential and transmission case. Drain the oil into a suitable container.
Change the filter element and clean the screens. See the Operation and Maintenance Manual, "Transmission and Differential Oil Filter and Screens - Replace/Clean".
Clean the drain plug and install the drain plug for the differential and transmission case.
Illustration 2 g00986408
Open the access door.
Fill the transmission and differential case with oil through filler tube (2). See Operation and Maintenance Manual, "Capacities (Refill)".
Remove transmission breather (3) and discard the transmission breather. Install a new transmission breather.
Start the engine and run the engine at low idle. Inspect the transmission and differential components for leaks.
Engage the transmission modulator control (pedal). Slowly operate the transmission control lever in order to circulate the oil.
With the engine at low idle, maintain the oil level between the marks on the dipstick. If necessary, add oil through the filler tube.
Stop the engine.
Close the access door.

Caterpillar parts catalog:

Caterpillar parts catalog
CP-323 VIBRATORY COMPACTOR 6JD00001-00065 (MACHINE) POWERED BY 4219D ENGINE


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.