AVSPARE.COM
parts catalog

RUBBER FLASHIN 1C4125 - Caterpillar



1C4125 RUBBER FLASHIN Caterpillar parts RUBBER
Rating:
56
Alternative (cross code) number:
CA1C4125
1C-4125
1C4125
Caterpillar 1C4125 RUBBER FLASHIN
Weight: 17 pounds 8 kg.

Buy RUBBER FLASHIN 1C4125 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Typical Example1. Loosen hose clamp (1). Remove bolt (2) that holds the pipe to the engine block.2. Turn breather tube (3) away from the exhaust manifold.
Typical Example3. Remove nuts (4) and the spacers that hold the exhaust manifold to the cylinder head.4. Remove exhaust manifold (5) and the gaskets. The following steps are for the installation of the exhaust manifold. 5. To install, put new gaskets in position on the cylinder head. Put exhaust manifold (5) in position on the studs. 6. Put 5P-3931 Anti-Seize Compoundon the studs. Install spacers and nuts (4) that hold the exhaust manifold. Tighten the nuts in the numerical sequence shown to a torque of 51 7 N m (38 5 lb ft).7. Put breather tube (3) in position and install pipe clamp with bolt (2) and hose clamp (1).End By:a. install turbocharger


Parts rubber Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.