SCREEN GP 3844320 - Caterpillar

Illustration 2 g00874165
Danger Label for Electrical Shock (Outside of North America)
The motor starter compartment should not be accessed unless the equipment is de-energized. Personal injury and/or damage to the switchgear could occur if the motor starter compartment is accessed when the equipment is energized. Do not operate the power module if the cover for the motor starter compartment is not installed. Ensure that the cover for the motor starter compartment is installed. Bodily contact with electrical potential will cause personal injury or death.
Failure to connect the unit to a suitable grounding electrode will result in electrical shock and will cause injury or death.
High voltage may be present. The power source must be disconnected before working on the equipment. Failure to disconnect the power source could result in injury or death. Verify that the equipment is not energized before performing any maintenance. This work must be performed by trained personnel with correct tools and procedures. Bodily contact with electrical potential will cause personal injury or death.
Personal injury or death and/or damage to the switchgear and the components of the switchgear may occur if the internal components of the switchgear are not assembled correctly. Components that are improperly located within the switchgear could cause damage to the switchgear. Verify the integrity of the internal components of the switchgear. Ensure that a safety check is performed before the switchgear is energized. Bodily contact with electrical potential will cause personal injury or death.
Improper handling of the equipment may result in personal injury or death or damage to the equipment. Have qualified personnel move the equipment if replacement of the switchgear is necessary. Be careful and move the equipment slowly. Ensure that the equipment is not handled in a rough manner. Bodily contact with electrical potential will cause personal injury or death.
Short circuits can cause severe personal injury and damage to equipment. Short circuits may be the result of damage to the equipment or improper installation procedures. Examine the equipment to detect problems while the switchgear is de-energized. Bodily contact with electrical potential will cause personal injury or death.
Working with electrical circuits is hazardous. Bodily contact with electrical potential will cause personal injury or death. Ensure that personnel are trained in proper operating procedures in order to ensure safe operation.
The metallic guard is installed on the equipment before the equipment is shipped. Do not operate the equipment if the metallic guard is not properly installed. Use the bolts that are provided in order to reinstall the metallic guard if the guard is removed. Operating the equipment without the metallic guard installed may result in personal injury or death by electrocution. Bodily contact with electrical potential will cause personal injury or death.
The secondary wires of the current transformer must be shorted together when they are disconnected from the equipment. Extremely high voltages will be generated at the lead ends if the secondary wires are not shorted together. Bodily contact with high voltage will result in serious injury or death.
Location of Danger Labels
Illustration 3 g00882004
Left Cabinet of