AVSPARE.COM
parts catalog

SEAL-PISTON 2333318 - Caterpillar



2333318 SEAL-PISTON Caterpillar parts SEAL
Rating:
86
Alternative (cross code) number:
CA2333318
233-3318
2333318
Caterpillar 2333318 SEAL-PISTON

Buy SEAL-PISTON 2333318 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 7 g00518636
Install valve assembly (45).
Install O-ring seal (44) on plug (43). Install the assembly.
Illustration 8 g00518634
Install O-ring seal (42) on plug (41). Install the assembly. Repeat this procedure for the three remaining plugs.
Illustration 9 g00518633
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install washer (37) and spring (38).
Install O-ring seal (39) on plug (40). Install plug (40). Tighten plug assembly to a torque of 50 5 N m (37 4 lb ft).
Apply Tooling (B) to O-ring seal (35) and spool (36).
Install spool (36) from connector (33).
Install O-ring seal (35) on spool (36). Install connector (33).
Install O-ring seal (34) on connector (33). Install the assembly.
Illustration 10 g00518630
Install O-ring seal (30) on plug (29). Install plug (29). Repeat this procedure for the four remaining plugs.
Install O-ring seals (31) and O-ring seal (32).
Illustration 11 g00518629
Position body (28). Install bolts (27). Tighten bolts (27) to a torque of 30 4 N m (22 3 lb ft).
Illustration 12 g00518628
Install O-ring seal (22), cover (21), and bolts (20).
Install O-ring seal (26) on plug (25). Install plug (25). Tighten plug (25) to a torque of 5.5 1.5 N m (49 13 lb in).
Install O-ring seal (24) on plug orifice (23). Install plug orifice (23). Tighten plug orifice (23) to a torque of 5.5 1.5 N m (49 13 lb in).
Illustration 13 g00518645
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Assemble spool assembly (6) in the following manner:
Install ball (69).
Install spring (70).
Install retainer (71).
Use Tooling (A) in order to install retaining ring (72).
Illustration 14 g00518627
Illustration 15 g00520311
Install spool assembly (6), spring (8), stop (18), and piston (10).
Install piston (7), shim (17), spacer (16), shim (15), spring (9), spring (11), and slug (19).
Install O-ring seal (12), orifice (13), and spring (14).
Illustration 16 g01140854
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install body (5) and bolts (4).
Illustration 17 g00518624
Install O-ring seal (3) on cover (1). Install bolts (2). Tighten bolts (2) to a torque of 30 7 N m (22 5 lb ft). End By:
Install the lockup clutch and synchronizing valve. Refer to Disassembly and Assembly, "Lockup Clutch and Synchronizing Valve - Install".


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.