AVSPARE.COM
parts catalog

SEAL-PACKING 2333634 - Caterpillar



2333634 SEAL-PACKING Caterpillar parts SEAL
Rating:
71
Alternative (cross code) number:
CA2333634
233-3634
2333634
Caterpillar 2333634 SEAL-PACKING

Buy SEAL-PACKING 2333634 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 1
Illustration 1 g00514597
Remove bolt (24). Position Tool (A). Reinstall bolt (24). Bolt (24) and Tool (A) are for the attachment of the hoist. Note: During the installation of bolts (24), tighten the bolts to a torque of 30 4 N m (22.1 2.9 lb ft).
Use a suitable hoist to install transmission valve (23). Transmission valve (23) weighs approximately 61 kg (134.5 lb).
Illustration 2 g00514596
Install the four washers and four bolts (22). Note: During the installation of bolts (22), tighten the bolts to a torque of 48 4 N m (35.4 2.9 lb ft).
Illustration 3 g00514593
Illustration 4 g00514595
Place the transmission valve (9) on a suitable bench.
Install two tubes (21), tube (20), tube assembly (18), and coupler assembly (19) with transmission valve (9).
Install transmission valve (9), four washers, and four bolts (17). Note: During the installation of bolts (17), tighten the bolts to a torque of 48 4 N m (35.4 2.9 lb ft).
Illustration 5 g00514591
Install gasket (16).
Illustration 6 g00514590
Install cover (15).
Install 21 bolts (14) on cover (15).
Connect three harness connections (13) on the transmission solenoids.
Install guard (1), clip (3), two washers, and remaining two bolts (2).
Illustration 7 g00514589
Install O-ring seal (7), elbow (6), and O-ring seal (5). Connect hose assembly (8).
Connect harness (12) to the transmission gear switch of the EPTC II.
Install clip (3), two washers, and two bolts (2) on guard (1) and harness (4).
Install clip (11), the washer, and bolt (10) on harness (4). End By:
Remove the truck body retaining cable. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.