AVSPARE.COM
parts catalog

SEAL-PACKING 2333637 - Caterpillar



2333637 SEAL-PACKING Caterpillar parts SEAL
Rating:
86
Alternative (cross code) number:
CA2333637
233-3637
2333637
Caterpillar 2333637 SEAL-PACKING

Buy SEAL-PACKING 2333637 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 11 g00524255
Use a suitable press and Tool (C) in order to hold spring (23) in compression.
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tool (A) in order to remove retaining ring (24).
Slowly release the compression on spring (23).
Remove the following item from block (18): spring (23), washer (22), pin keeper (21) and three pins (20).
Illustration 12 g00524259
Illustration 13 g00524260
Use Tool (A) in order to remove retaining ring (25) from pump housing (5).
Illustration 14 g00524261
Reposition pump housing (5). Use a soft faced hammer in order to remove shaft (26) from pump housing (5).
Illustration 15 g00524262
Illustration 16 g00524263
Remove lip seal (27) and washer (28) from shaft (26).
Illustration 17 g00524264
Use Tool (B) (not shown) in order to remove retaining ring (31) from shaft (26).
Remove two races (29) and bearing (30) from shaft (26).
Illustration 18 g00524265
Illustration 19 g00524266
Use Tool (A) (not shown) in order to remove retaining ring (32) from pump housing (5).
Remove cover (36) and seal (34) from pump housing (5).
Remove bearing (33) and race (35) from pump housing (5).
Repeat Steps 15 through 17 for the remaining side of pump housing (5).
Illustration 20 g00524267
Illustration 21 g00524268
Remove swashplate (37) from pump housing (5).
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove collar (39) and spring (38) from pump housing (5).
Illustration 22 g00524289
Use an appropriate drift in order to remove pin (40) from swashplate (5). Remove button (41) from swashplate (5).
Illustration 23 g00524290
Use Tool (C) (not shown) in order to remove bearing (42) from pump housing (5).


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.