parts catalog

SEAL-PACKING 2333640 - Caterpillar

2333640 SEAL-PACKING Caterpillar parts SEAL
Alternative (cross code) number:
Caterpillar 2333640 SEAL-PACKING

Buy SEAL-PACKING 2333640 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect the condition of the following items: rocker arm assemblies, valve bridge assemblies and pushrods. Replace the parts, if necessary.
Illustration 1 g01064554
Install valve bridge assemblies (7). Apply clean engine oil to the top surface of the valve bridge assemblies.
Install pushrods (6) in the original location in the engine.
Position rocker arm assembly (5) and rocker shaft (2) in the original location. Install adjusting screw (4) and locknut (3). Tighten adjusting screw (4) and locknut (3) to a torque of 8 5 N m (71 44 lb in).
Illustration 2 g01064552
Install bolts (1) in rocker shaft (2) .
Adjust the engine valve lash. Refer to Testing and Adjusting, "Engine Valve Lash - Inspect/Adjust".End By: Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.