2333656 SEAL-PACKING Caterpillar parts SEAL
Alternative (cross code) number:
Note: Clean all components thoroughly. Apply clean oil to the components before assembly.
Illustration 1 g00627344
Assemble orifice sleeve (14) and install retaining ring (13) on valve stem (12).
Apply 138-8436 Liquid Gasket to the threads of plug (15). Install plug (15) on valve stem (12).
Illustration 2 g00627342
Illustration 3 g00627340
Install valve stem (12) in the valve body. Position slot (A) on valve stem (12) for alignment with piston (11).
Install piston (11), pin (10), and plug (9). The end of piston (11) and slot (A) need to be in proper alignment in order to tighten plug (9).
Illustration 4 g00627337
Install seal (8) in the cover. Install the cover and install four bolts (7) in the quick-drop valve.
Illustration 5 g00627336
Install the piston (not shown) in the valve housing. Install spring (6) in the valve housing.
Illustration 6 g00627317
Install O-ring seal (3), stop (4), and shims (5) in cover (2).
Illustration 7 g00627315
Install cover (2) with bolts (1). End By:
Install the quick-drop valve on the machine. Refer to , "Quick-Drop Valve - Install" in this module.