AVSPARE.COM
parts catalog

SEAL-PACKING 2333659 - Caterpillar



2333659 SEAL-PACKING Caterpillar parts SEAL
Rating:
66
Alternative (cross code) number:
CA2333659
233-3659
2333659
Caterpillar 2333659 SEAL-PACKING

Buy SEAL-PACKING 2333659 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Description Qty
A 138-7574 Link Bracket 2
B 180-3034 Stand 1 Start By:
Remove the ripper carriage. Refer to Disassembly and Assembly Manual, "Ripper Carriage (Beam) - Remove and Install".
Remove the ripper lift cylinders. Refer to Disassembly and Assembly Manual, "Ripper Lift Cylinder - Remove and Install".
Personal injury or death can result from lifting a heavy assembly.The heavy assembly can fall if using an incorrect hoist to lift the load.Be sure the hoist has the correct capacity to lift a heavy assembly. Approximate weight of the assembly is given below.
Note: Mark the locations of shims and of other components for correct installation.
Illustration 1 g00630380Note: Guard (1) for the transmission weighs 68 kg (150 lb).
Remove eight bolts (2) and remove guard (1) for the transmission.
Remove bracket (3) and remove pin (4).
Illustration 2 g01018589Note: Ripper frame (8) weighs 900 kg (2000 lb).
Install tool (A) on ripper frame (8) and attach a suitable lifting device.
Place tool (B) under the ripper frame.
Remove the following components from each side of ripper frame (8): two bolts (5), plate (6) and pin (7).
Remove ripper frame (8). Installation Procedure
Table 2
Required Tools
Tool Part Number Description Qty
A 138-7574 Link Bracket 2
B 180-3034 Stand 1
Personal injury or death can result from lifting a heavy assembly.The heavy assembly can fall if using an incorrect hoist to lift the load.Be sure the hoist has the correct capacity to lift a heavy assembly. Approximate weight of the assembly is given below.
Illustration 3 g01018589Note: Ripper frame (8) weighs 900 kg (2000 lb).
Install ripper frame (8) on the machine. Use tool (B) to support the ripper frame.
Install the following components on each side of the ripper frame: two bolts (5), plate (6) and pin (7)..
Illustration 4 g00630380
Install bracket (3) and install pin (4). Note: Guard (1) for the transmission weighs 68 kg (150 lb).
Install guard (1) for the transmission. Install eight bolts (2). End By:
Install the ripper lift cylinders. Refer to Disassembly and Assembly Manual, "Ripper Lift Cylinder - Remove and Install".
Install the ripper carriage. Refer to Disassembly and Assembly Manual, "Ripper Carriage (Beam) - Remove and Install".


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.