parts catalog

SEAL-PACKING 2333677 - Caterpillar

2333677 SEAL-PACKING Caterpillar parts SEAL
Alternative (cross code) number:
Caterpillar 2333677 SEAL-PACKING

Buy SEAL-PACKING 2333677 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Disassembly Procedure
Start By:
Remove the steering solenoid and relief valve. Refer to Disassembly and Assembly, "Solenoid and Relief Valve (Steering) - Remove". Note: Cleanliness is an important factor. Before the disassembly procedure, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble.
Illustration 1 g00525116
Illustration 2 g00525235
Place valve (1) onto a suitable work bench.
Remove locknut (2) and the washer from cartridge (3) in order to remove coil assembly (4).
Remove cartridge assembly (3) from valve (1).
Illustration 3 g00525125
Remove O-ring seal (5), O-ring seal (6) and the backup ring from cartridge assembly (3).
Illustration 4 g00525128
Remove O-ring seal (7) from check valve (8). Remove check valve (8) from valve (1).
Illustration 5 g00525129
Remove O-ring seal (9) from check valve (8).
Illustration 6 g00525135
Illustration 7 g00525137
Remove relief valve (10) from valve (1). Remove O-ring seal (11) from relief valve (10).
Illustration 8 g00525144
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove nut (12) from retainer (17). Remove retainer (17) from valve body (16). Remove O-ring seal (13) from retainer (17).
Remove the following items from valve body (16): hard washer (18), spring (14), plate (19) and valve (15).
Remove O-ring seal (20) from valve body (16).
Illustration 9 g00525146
Remove orifice plug (21) from valve (1).
Illustration 10 g00525186
Illustration 11 g00525187
Remove fluid sampling valve (23) and the O-ring seal from valve (1).
Remove cap (22) from nipple (24). Remove quick-connect coupling (25) and the O-ring seal from valve (1).

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.