parts catalog

SEAL-PISTON 2333755 - Caterpillar

2333755 SEAL-PISTON Caterpillar parts SEAL
Alternative (cross code) number:
Caterpillar 2333755 SEAL-PISTON
Weight: 0.30 pounds 0 kg.

Buy SEAL-PISTON 2333755 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Table 1
Compartment     Recommended Oil Change Interval     Recommended Sampling Interval     Sampling Valve     Oil Type    
Engine     250 Hours     250 Hours     Yes     DEO    
Hydraulics     1000 Hours     250 Hours     Yes     MTO    Consult your Caterpillar dealer for complete information and assistance in establishing an S O S program for your equipment.More Frequent S O S Sampling Improves Life Cycle Management
Traditionally, the suggested S O S sampling intervals have been at each oil change, 250 hours for engines, or every 500 hours for all other compartments. However, when you operate the machine under the following conditions a sampling interval of 250 hours is recommended for all compartments.Application
Studies show that a 500 hour interval between oil samplings is too long for the timely indication of potential failure modes for some applications. These applications have high loads and high temperatures. A 250 hour sampling interval provides more data between oil change intervals. This increases the potential for detecting a potential failure.Determining Optimal Oil Change Intervals
Sampling compartments every 250 hours also provides oil condition/performance information to ascertain the optimal utility of a particular oil. Also, more data points enable close monitoring of component wear rates while obtaining maximum lubrication utility. For detailed information on extending oil change intervals, please consult your Caterpillar dealer.Optimizing Component Life Cycle
An increased sampling frequency also provides better defined data trends from one oil change interval to the next. This enables close monitoring of component life cycle wear patterns to ensure full component life cycle is realized.In summary, the standard S O S oil sampling interval for all engines remains at 250 hours. While 500 hour oil sample intervals remain acceptable for non-engine compartments, they are not necessarily optimal. Under the above conditions, 250 hour oil sampling intervals are recommended.

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.