AVSPARE.COM
parts catalog

SEAL-PISTON 2333762 - Caterpillar



2333762 SEAL-PISTON Caterpillar parts SEAL
Rating:
66
Alternative (cross code) number:
CA2333762
233-3762
2333762
Caterpillar 2333762 SEAL-PISTON

Buy SEAL-PISTON 2333762 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 27 g00532735
Install Tooling (D) (not shown) to the transfer case assembly. Attach Tooling (D) (not shown) to a suitable lifting device. Use Tooling (D) (not shown) and a hoist in order to rotate the transfer case assembly. Position the transfer case assembly, as shown. The weight of the transfer case assembly is 272 kg (600 lb).
Remove Tooling (D) (not shown) from the transfer case assembly.
Mark the location of washer (44) for installation purposes. Remove 16 bolts (43), washer (44) and the washers from bearing cage assembly (45).
Illustration 28 g00532757
Mark the position of bearing cage assembly (45) for installation purposes. Install Tooling (D) to bearing cage assembly (45). Attach Tooling (D) to a suitable lifting device and a hoist.
Use Tooling (D) and a hoist in order to remove bearing cage assembly (45) and carrier assembly (46) as a unit. The weight of bearing cage assembly (45) and carrier assembly (46) as a unit is 36 kg (80 lb).
Position bearing cage assembly (45) and carrier assembly (46) onto a suitable work bench as a unit. Remove Tooling (D) from bearing cage assembly (45).
Illustration 29 g00533361
Remove two seal rings (47) from carrier assembly (46).
Remove six bolts (48) from bearing cage assembly (45).
Illustration 30 g00533362
Illustration 31 g00533364
Position bearing cage assembly (45) into a suitable press. Use Tooling (H) and the press in order to remove roller bearing cup (49) and carrier assembly (46) from bearing cage assembly (45). The weight of bearing cage assembly (45) is 36 kg (80 lb).
Illustration 32 g00533367
If necessary, remove O-ring plug (50) and the O-ring seal from bearing cage assembly (45).
If necessary, remove ball (51) from bearing cage assembly (45).
Illustration 33 g00533451
If necessary, remove orifice plug (52) from carrier assembly (46).
Illustration 34 g00533457
Use Tooling (G) in order to remove bearing race (53) from carrier assembly (46).
Illustration 35 g00533461
Remove shim pack (54) from the transfer case assembly.
Illustration 36 g00533463
Install Tooling (I) to transfer gear (55). Attach Tooling (I) to a suitable lifting device and a hoist.
Use Tooling (I) and a hoist in order to remove transfer gear (55) from the transfer case assembly. The weight of transfer gear (55) is 45 kg (100 lb).
Position transfer gear (55) onto a suitable work bench. Remove Tooling (I) from transfer gear (55).
Illustration 37 g00533465
Illustration 38 g00565395
Use Tooling (G) to remove roller bearing cone (56) from transfer gear (55).
Position transfer gear (55), as shown. Use Tool (G) in order to remove the remaining roller bearing cone (57) from transfer gear (55).
Illustration 39 g00533469
Remove roller bearing cup (58) from the transfer case assembly.
Illustration 40 g00533472
If necessary, remove ball (59) from the transfer case assembly.


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.