AVSPARE.COM
parts catalog

SEAL-PISTON 2333792 - Caterpillar



2333792 SEAL-PISTON Caterpillar parts SEAL
Rating:
31
Alternative (cross code) number:
CA2333792
233-3792
2333792
Caterpillar 2333792 SEAL-PISTON

Buy SEAL-PISTON 2333792 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 125 g00530634
Install two O-ring seals (23) to magnetic screen group (22).
Illustration 126 g00530632
Install magnetic screen group (22) to the transmission case with three bolts (21) and the washers.
Illustration 127 g00533598
Illustration 128 g00530327
Remove four bolts (20) and the washers from transmission case (34) and Tooling (K). Use Tooling (E) and a hoist to remove the transmission and transfer gears from Tooling (K) as a unit. The weight of the transmission and the transfer gears is approximately as a unit.
Use Tooling (D) and the hoist in order to remove the transmission and transfer gears from Tooling (K). The weight of the transmission and transfer gears is 2040 kg (4500 lb).
Position the transmission and transfer gears in the horizontal position on a suitable stand, as shown.
Illustration 129 g00533683
Install Tool (L) to transmission hydraulic control (19). Attach Tool (L) to a suitable lifting device and a hoist.
Use Tool (L) and the hoist to position transmission hydraulic control (19) into the transmission case. The weight of transmission hydraulic control (19) is 64 kg (141 lb).
Remove Tool (L) and the hoist.
Illustration 130 g00530392
Use four bolts (18) and the washers in order to install transmission hydraulic control (19). Tighten four bolts (18) to a torque of 48 4 N m (35 3 lb ft).
Illustration 131 g00530386
Illustration 132 g00530385
Install O-ring seal (16) onto one-piece flange (14). Install two O-ring seals (17) to sleeve (15).
Install sleeve (15) into one-piece flange (14).
Repeat Steps 197 through 198 for the remaining one-piece flange and the remaining sleeve.
Install two one-piece flanges (14) with two sleeves (15) into the transmission case.
Illustration 133 g00530383
Use four bolts (10) and the washers in order to install manifold assembly (11) to the transmission case.
Illustration 134 g00530382
Install gasket (9) onto the transmission case.
Illustration 135 g00530381
Use 21 bolts (8) to install cover (5) to the transmission case.
Install three bolts (7), the washers, and the clips to cover (5).
Illustration 136 g00530380
Install gasket (6) to cover (5).
Illustration 137 g00530379
Use ten nuts (3) in order to install cover (4) to cover (5).
Illustration 138 g00530378
Use four bolts (1) and the washers in order to install guard (2) to the transmission case.
Install the transmission planetary and the transfer gears. Refer to Disassembly and Assembly, "Transmission and Transfer Gears - Install".


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.