AVSPARE.COM
parts catalog

SEAL-PISTON 2333797 - Caterpillar



2333797 SEAL-PISTON Caterpillar parts SEAL
Rating:
51
Alternative (cross code) number:
CA2333797
233-3797
2333797
Caterpillar 2333797 SEAL-PISTON

Buy SEAL-PISTON 2333797 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Installation Procedure
Check all of the O-ring seals and components for wear or damage. Replace the components, if necessary.
Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
Illustration 1 g00469086
Use a suitable hoist and a lifting device in order to position lubrication pump (3) onto the right hand platform. The weight of lubrication pump (3) is approximately 23 kg (50.7 lb).
Use three bolts (4) and the washers in order to install lubrication pump (3) onto the right hand platform.
Remove the cap from the openings. Immediately connect hose assemblies (1) and (2).
Fill the lubrication pump with lubricant to the correct level. Refer to Operation and Maintenance Manual, SEBU7173, "Automatic Lubrication Reservoir - Fill" for the correct procedure.
Charge the air pressure in the air tank. Refer to Operation and Maintenance Manual, SEBU7173, "Starting with an External Air Supply" for the correct procedure. End By:
Remove the wheel chocks. Refer to Disassembly and Assembly, "Wheel Chock (Front and Rear) - Remove and Install".


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.