AVSPARE.COM
parts catalog

SEAL-PISTON 2333799 - Caterpillar



2333799 SEAL-PISTON Caterpillar parts SEAL
Rating:
61
Alternative (cross code) number:
CA2333799
233-3799
2333799
Caterpillar 2333799 SEAL-PISTON

Buy SEAL-PISTON 2333799 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Assembly Procedure
Check all of the O-ring seals and the components for wear or damage. Replace the components, if necessary.
Lubricate all of the O-ring seals lightly with the lubricant that is being sealed.
Illustration 1 g00470099
Illustration 2 g00470097
Install fitting (24) and nut (22).
Install nut (23), rod (29), fitting (30), and plate (21).
Install elbow (20), tube (28), nut (26), plate (27), and six washers (25). Note: Plate (21) has two holes that are different sizes. The pump assembly will only fit through the larger hole.Note: Install four washers (25) between the lid and the plate. Install remaining two washers (25) between the elbow and the lid.
Illustration 3 g00469572
Install bushing (10), tee (12), and nipple (11). Note: Before installation, apply 5P-3413 Pipe Sealant to the tapered threads.
Install adapter (14), check valve (15), and nipple (16). Note: Before installation, apply 5P-3413 Pipe Sealant to the tapered threads.
Install coupling (13), elbow (17), and relief valve (19). Note: Before installation, apply 5P-3413 Pipe Sealant to the tapered threads.
Install bracket (18), the two bolts, and the washers.
Illustration 4 g00469547
Connect the pressure regulating valve and the fitting assembly to the pump assembly.
Illustration 5 g00538435
Position pump assembly (5), pressure regulating valve (7), and gasket (6). Use four bolts (9) and the four washers to install pump assembly (5), pressure regulating valve (7), and gasket (6). Note: Before installation, apply 7M-7456 Compound to the bolts.Note: Prior to installation, remove any paint that is located on the bottom of the lubricant pump group.
Use two bolts (8), the washers, and the two nuts in order to connect the pressure regulator valve to the lid.
Illustration 6 g00469248
Slide follower assembly (3) on the pump assembly. Install ring (4) (not shown). Use two screws to lock ring (4) into position. Connect the chain to the rod.
Install hose assembly (2). Note: Before installation, apply 5P-3413 Pipe Sealant to the tapered threads.
Illustration 7 g00469247
Install the lid of the lubrication pump on the container. Secure the lid with the four clamps (arrows).
Install hose assembly (1). Note: Before installation, apply 5P-3413 Pipe Sealant to the tapered threads.End By:
Install the automatic lubrication pump. Refer to Disassembly and Assembly, "Lubrication Pump (Automatic) - Install".


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.