parts catalog

SEAL-PISTON 2333811 - Caterpillar

2333811 SEAL-PISTON Caterpillar parts SEAL
Alternative (cross code) number:
Caterpillar 2333811 SEAL-PISTON

Buy SEAL-PISTON 2333811 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Illustration 1 g01416442
(1) Torque for thrust pin ... 28 7 N m (20 5 lb ft) (2) Diameter of new camshaft journals ... 74.850 0.025 mm (2.9468 .0010 inch) (3) Key (4) Part number (5) Gear
Illustration 2 g01416407
(A) Camshaft lobe liftSpecified camshaft lobe lift (6) Exhaust lobe ... 9.550 mm (.3760 inch) Inlet lobe ... 11.371 mm (.4477 inch) Injector lobe ... 10.474 mm (.4124 inch) (B) Camshaft lobe height (C) Base circleSpecified base circle (C) Exhaust lobe ... 55.0 0.2 mm (2.17 0.01 inch) Inlet lobe ... 51.0 0.2 mm (2.01 0.01 inch) Injector lobe ... 52.2 0.2 mm (2.06 0.01 inch)To find the lobe lift, use the procedure that follows:
Measure the camshaft lobe height (B) .
Measure the base circle (C) .
Subtract the base circle that is found in Step 2 from the lobe height that is found in Step 1. The difference is the actual camshaft lobe lift (A) .Maximum permissible difference between actual lobe lift and the specified lobe lift of a new camshaft ... 0.13 mm (.005 inch)

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.