parts catalog

SEAL-PISTON 2333872 - Caterpillar

2333872 SEAL-PISTON Caterpillar parts SEAL
Alternative (cross code) number:
Caterpillar 2333872 SEAL-PISTON

Buy SEAL-PISTON 2333872 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7573     Link Bracket     1    Note: Replace the gasket before the installation of the air compressor.
Illustration 1 g00536466
Illustration 2 g00536468
Use a suitable lifting device, a lifting sling, and Tool (A). Install air compressor (5). Air compressor (5) weighs 24 kg (52.9 lb). Install the three washers and three bolts (7) .
Connect two tubes (6) and (8) to air compressor (5) .
Connect hose (9) to air compressor (5) .
Connect tube (2) to air compressor (5) .
Connect four hoses (1), (3), and (4) to air compressor (5) .
Fill the jacket water cooling system on the right side. The capacity of the jacket water cooling system is 360 L (95.1 US gal).Note: Refer to Air Compressor, REG00914, "Disassembly and Assembly" for the correct procedure to disassemble the air compressor and assemble the air compressor.End By: Close the drain valves. Refer to Disassembly and Assembly, "Air Tanks (Brake) - Purge".

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.