AVSPARE.COM
parts catalog

SEAL-PISTON 2333884 - Caterpillar



2333884 SEAL-PISTON Caterpillar parts SEAL
Rating:
71
Alternative (cross code) number:
CA2333884
233-3884
2333884
Caterpillar 2333884 SEAL-PISTON

Buy SEAL-PISTON 2333884 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8H-8546     Head (Breaker Bar)     1    
B     162-8716     Handle     1    
C     N/A     3/8 in. NC Guide Bolts     2    
D     N/A     1 in. NF Guide Bolts     2    
E     138-7575     Link Bracket     2    
Illustration 1 g00537124
Use Tooling (A) and Tooling (B) in order to relieve the tension on the V-belts for the fan drive. Remove the V-belts from pulley (1) .
Remove the tension from the V-belt of the refrigerant compressor. Remove the V-belt of the refrigerant compressor from pulley (1). For more information, refer to Disassembly and Assembly, SENR1461-01, "Refrigerant Compressor - Remove and Install".
Remove bolts (2) that fasten pulley (1) to wedge bracket (3) .
Install bolts (2) in the threaded holes in pulley (1). Evenly turn bolts (2) until pulley (1) can be removed from wedge bracket (3) .Note: Bolts (2) are used as forcing screws in order to separate pulley (1) from wedge bracket (3) .
Illustration 2 g00537125
Mark the location of wedge bracket (3) on stub shaft (4). This is for installation purposes. The wedge bracket must be installed in the same position in order to properly align the V-belts.
Loosen the setscrew at location (X). Remove wedge bracket (3) and key (5) from stub shaft (4) .
Remove two bolts (6). Install Tooling (C) .
Remove the remainder of bolts (6). Use a suitable lifting device to remove damper assembly (7). The weight of damper assembly (7) is approximately 26 kg (57 lb).
Illustration 3 g00537126
Remove two bolts (9). Install Tooling (D) .
Remove the remainder of bolts (9). Remove stub shaft (4) from vibration damper (8) .
Illustration 4 g00537127
Use Tooling (E) and a suitable lifting device to remove vibration damper (8) and adapter (10). The weight of the damper and the adapter is approximately 114 kg (251 lb).
Remove bolts (11). Remove vibration damper (8) from adapter (10). The weight of vibration damper (8) is approximately 80 kg (176 lb). The weight of adapter (10) is approximately 34 kg (75 lb).


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.