AVSPARE.COM
parts catalog

SEAL-PISTON 2333887 - Caterpillar



2333887 SEAL-PISTON Caterpillar parts SEAL
Rating:
86
Alternative (cross code) number:
CA2333887
233-3887
2333887
Caterpillar 2333887 SEAL-PISTON

Buy SEAL-PISTON 2333887 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     185-3630     Strap Wrench As     1    
B     138-7575     Link Bracket     1    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Hot oil and components can cause personal injury.Do not allow hot oil or components to contact the skin.Be sure that the engine and components are cool enough to touch with your bare hand prior to performing any service work.
Illustration 1 g00537375
Use Tooling (A) (not shown) to remove filters (1) from the oil filter base.
Drain the oil that is contained in the oil filter base.
Loosen bolt (2). Remove bolts (3) and tube (5) from oil filter base (4) .
Illustration 2 g01013534
Loosen bolt (6). Remove two bolts (7) and tube (8) from oil filter base (4) .
Illustration 3 g00537377
Use Tooling (B) (not shown) and a suitable lifting device to support engine oil filter base (4). The weight of engine oil filter base (4) is approximately 39 kg (86 lb).
Remove bolts (9) and oil filter base (4) from support assembly (10) .Installation Procedure
Illustration 4 g00537377
Use Tooling (B) (not shown) and a suitable lifting device to support engine oil filter base (4). The weight of engine oil filter base (4) is approximately 39 kg (86 lb).
Install oil filter base (4) and bolts (9) on support assembly (10) .
Illustration 5 g01013534
Install tube (8) and two bolts (7) on oil filter base (4). Tighten bolt (6) .
Illustration 6 g00537375
Install tube (5) and bolts (3) on oil filter base (4). Tighten bolt (2) .
Use Tooling (A) (not shown) to install filters (1) on the oil filter base.
During the installation of filters (1), refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct procedure.
Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct refill capacities and for the correct filling procedure.


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.