AVSPARE.COM
parts catalog

SEAL-PISTON 2333889 - Caterpillar



2333889 SEAL-PISTON Caterpillar parts SEAL
Rating:
16
Alternative (cross code) number:
CA2333889
233-3889
2333889
Caterpillar 2333889 SEAL-PISTON

Buy SEAL-PISTON 2333889 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 74 g00537489
Remove the rear step in order to access the lifting hook for the removal of the engine. Disconnect the assembly that is indicated by the arrow.
Remove the front step in order to access the lifting hook for the removal of the engine.
Illustration 75 g00537490
Illustration 76 g00537491
Loosen four hose clamps (94) .
Slide hose (95) into a position that will permit the removal of the engine.
Illustration 77 g00537492
Illustration 78 g00537493
Loosen hose clamp (96). Reposition the hose clamp.
Push the hose off the tube assembly.
Leave the hose in the position that is shown for the removal of the engine.
Illustration 79 g00537494
Illustration 80 g00537497
Attach a suitable lifting device in order to support the tube assembly during removal.
Remove four bolts (98), four washers (99), and shims (97) from one side of tube assembly (87). Repeat this procedure for the other side of the tube assembly.
Failure to follow the recommended procedure or the specified tooling that is required for the procedure could result in damage to components.To avoid component damage, follow the recommended procedure using the recommended tools.
Note: During the removal of the tube assembly and the engine, place a suitable jack under the chassis in order to support the frame. Leave the jack in place until tube assembly (87) is installed.
Illustration 81 g00537494
Illustration 82 g00537499
Remove tube assembly (87) from the machine.
Illustration 83 g00537500
Illustration 84 g00537501
Install the chains and a suitable spreader bar in order to support the engine.
Illustration 85 g00537502
Prepare to remove the engine and the torque converter. The combined weight of the engine and torque converter is 9621 kg (21210.7 lb).
When the engine and the torque converter are removed, the weight of the unit may shift. This could cause personal injury or death. Use extra caution to avoid the unit and to stabilize the unit during the removal procedure.
Note: During the removal of the engine and the torque converter, raise the engine and the torque converter by 152 mm (5.98 inch). Before continuing the removal procedure, check for any remaining connections.
Illustration 86 g00537503
Remove the engine and the torque converter from the machine.


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.